Faça download do firmware do Motorola para
dispositivo Moto G7 Play XT1952-2 com o firmware Motorola é possível fazer upgrade
ou
downgrade do sistema do
seu Moto G7 Play XT1952-2 e também
é possível recuperar seus dispositivos de loop infinito entre outros problemas
relacionado a software.
Primeiro de tudo, uma coisa importante - antes de começar a fazer qualquer coisa
com o seu telefone, faça o backup dos seus dados pessoais. É apenas para sua
segurança, caso algo dê errado ou ocorra algum erro. Nesse caso, você pode usar
o backup para restaurar os dados e tentar fazer tudo novamente.
O Google nos notificou que dia 16/12/2023 a conta Google Workspace do KF Host vai ser cancelada, caso alguém queira fazer uma cópia do nosso acervo de firmware entre em até dia 13/12/2023, veja aviso completo
Atenção
Nós do KF Host não nos responsabilizamos por quaisquer danos causados nos
dispositivos.
A responsabilidade é inteiramente do usuário.
Lista do
firmware disponível para esse
modelo Moto G7 Play XT1952-2
Atenção se você receber a mensagem abaixo ao tentar fazer download pelo Google Drive, acesse nosso vídeo ensinando passo a passo como solucionar
Assistir
VERSION INFO FOUND UNDER ABOUT PHONE SCREEN: System Version: 30.201.15.channel.retail.en.US Model Number: moto g(7) play Android Version: 10 Build Id: QPYS30.52-22-14 SW Display Build ID: QPYS30.52-22-14 Build Date: Fri Jan 29 05:11:08 CST 2021
OTHER MISC VERSION INFO: Subsidy Lock Config: slcf_rev_d_default_v1.0.nvm Regulatory Info (eLabel): regulatory_info_default.png eLabel SHA1: da39a3ee5e6b4b0d3255bfef95601890afd80709 Blur Version: Blur_Version.30.201.15.channel.retail.en.US Version when read from CPV: channel-user 10 QPYS30.52-22-14 d965a release-keys
AB Update Enabled: True Full Treble Enabled: True
Command:
fastboot getvar max-sparse-size fastboot oem fb_mode_set fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash modem NON-HLOS.bin fastboot flash fsg fsg.mbn fastbooterase modemst1 fastbooterase modemst2 fastboot flash dsp adspso.bin fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system system.img_sparsechunk.5 fastboot flash system system.img_sparsechunk.6 fastboot flash system system.img_sparsechunk.7 fastboot flash system system.img_sparsechunk.8 fastboot flash system_b system_b.img_sparsechunk.0 fastboot flash system_b system_b.img_sparsechunk.1 fastboot flash system_b system_b.img_sparsechunk.2 fastboot flash vendor vendor.img_sparsechunk.0 fastboot flash vendor vendor.img_sparsechunk.1 fastboot flash oem oem.img fastboot flash oem_b oem_other.img fastbooterase userdata fastbooterase DDR fastboot oem fb_mode_clear echo ----------------------------------------------------------------------------------------------- echo English - Process concluded! echo Português - Processo concluído! echo English - Press any key to restart the phone! echo Português - Pressione qualquer tecla para reiniciar o celular! echo ----------------------------------------------------------------------------------------------- pause fastboot reboot exit
VERSION INFO FOUND UNDER ABOUT PHONE SCREEN: System Version: 30.201.9.channel.retail.en.US Model Number: moto g(7) play Android Version: 10 Build Id: QPYS30.52-22-9 SW Display Build ID: QPYS30.52-22-9 Build Date: Wed Sep 30 21:59:36 CDT 2020
OTHER MISC VERSION INFO: Subsidy Lock Config: slcf_rev_d_default_v1.0.nvm Regulatory Info (eLabel): regulatory_info_default.png Blur Version: Blur_Version.30.201.9.channel.retail.en.US Version when read from CPV: channel-user 10 QPYS30.52-22-9 22b42 release-keys
AB Update Enabled: True Full Treble Enabled: True
Command:
fastboot getvar max-sparse-size fastboot oem fb_mode_set fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash modem NON-HLOS.bin fastboot flash fsg fsg.mbn fastbooterase modemst1 fastbooterase modemst2 fastboot flash dsp adspso.bin fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system system.img_sparsechunk.5 fastboot flash system system.img_sparsechunk.6 fastboot flash system system.img_sparsechunk.7 fastboot flash system system.img_sparsechunk.8 fastboot flash system_b system_b.img_sparsechunk.0 fastboot flash system_b system_b.img_sparsechunk.1 fastboot flash system_b system_b.img_sparsechunk.2 fastboot flash vendor vendor.img_sparsechunk.0 fastboot flash vendor vendor.img_sparsechunk.1 fastboot flash oem oem.img fastboot flash oem_b oem_other.img fastbooterase userdata fastbooterase DDR fastboot oem fb_mode_clear echo ----------------------------------------------------------------------------------------------- echo English - Process concluded! echo Português - Processo concluído! echo English - Press any key to restart the phone! echo Português - Pressione qualquer tecla para reiniciar o celular! echo ----------------------------------------------------------------------------------------------- pause fastboot reboot exit
# # system props for the cne module # persist.vendor.cne.feature=1
#system props for the MM modules media.msm8956hw=0 mm.enable.smoothstreaming=true mmp.enable.3g2=true media.aac_51_output_enabled=true av.debug.disable.pers.cache=1 media.settings.xml=/vendor/etc/media_profiles_vendor.xml
#minimum duration for offload playback in secs audio.offload.min.duration.secs=30
#enable offload audio video playback by default audio.offload.video=true
#enable music through deep buffer audio.deep_buffer.media=true
#Audio voice concurrency related flags voice.playback.conc.disabled=true voice.record.conc.disabled=false voice.voip.conc.disabled=true #Decides the audio fallback path during voice call, deep-buffer and fast are the two allowed fallback paths now. voice.conc.fallbackpath=deep-buffer
#parser input buffer size(256kb) in byte stream mode vendor.audio.parser.ip.buffer.size=262144
# # system props for the data modules # ro.vendor.use_data_netmgrd=true persist.vendor.data.mode=concurrent
#system props for time-services persist.timed.enable=true
#system prop for Bluetooth SOC type ro.bluetooth.library_name=libbluetooth_qti.so persist.vendor.btstack.enable.splita2dp=false
# System property for cabl ro.qualcomm.cabl=0 ro.vendor.display.cabl=0
# # System props for telephony # System prop to turn on CdmaLTEPhone always telephony.lteOnCdmaDevice=1
# # System props for bluetooh # System prop to turn on hfp client bluetooth.hfp.client=1
#Simulate sdcard on /data/media # persist.fuse_sdcard=true
# #snapdragon value add features # ro.qc.sdk.audio.ssr=false ##fluencetype can be "fluence" or "fluencepro" or "none" ro.vendor.audio.sdk.fluencetype=none persist.vendor.audio.fluence.voicecall=true persist.vendor.audio.fluence.voicerec=false persist.vendor.audio.fluence.speaker=true #Set for titanium tunnel.audio.encode = false #Buffer size in kbytes for compress offload playback audio.offload.buffer.size.kb=64 #Minimum duration for offload playback in secs audio.offload.min.duration.secs=30 #Enable offload audio video playback by default audio.offload.video=true
#Enable PCM offload by default #audio.offload.pcm.16bit.enable=true #audio.offload.pcm.24bit.enable=true
#Enable audio track offload by default audio.offload.track.enable=true
#Enable music through deep buffer audio.deep_buffer.media=true
#enable downsampling for multi-channel content > 48Khz audio.playback.mch.downsample=true
#disable voice path for PCM VoIP by default use.voice.path.for.pcm.voip=false ro.config.vc_call_vol_steps=8
#enable software decoders for ALAC and APE. use.qti.sw.alac.decoder=true use.qti.sw.ape.decoder=true
#System property for FM transmitter ro.fm.transmitter=false
#enable dsp gapless mode by default audio.offload.gapless.enabled=true
#enable pbe effects vendor.audio.safx.pbe.enabled=true #property for AudioSphere Post processing audio.pp.asphere.enabled=false
#property to enable user to access Google WFD settings #persist.debug.wfd.enable=1 #property to enable VDS WFD solution persist.hwc.enable_vds=1
#selects CoreSight configuration to enable persist.debug.coresight.config=stm-events
#selects Console configuration to enable persist.console.silent.config=1
#property to enable narrow search range for video encoding vendor.vidc.enc.disable_bframes=1 vendor.vidc.disable.split.mode=1 vendor.vidc.dec.downscalar_width=1920 vendor.vidc.dec.downscalar_height=1088
#prefer HW codec over SW for thumbnail media.stagefright.thumbnail.prefer_hw_codecs=true
# system prop for UBWC vendor.video.disable.ubwc=1
# disable PQ feature by default vendor.vidc.enc.disable.pq=true
# Additional buffers shared between Camera and Video vidc.enc.dcvs.extra-buff-count=2
# system property to accelerate Progressive Download using STA persist.mm.sta.enable=0
VERSION INFO FOUND UNDER ABOUT PHONE SCREEN: System Version: 30.201.4.channel.retail.en.US Model Number: moto g(7) play Android Version: 10 Build Id: QPYS30.52-22-5 SW Display Build ID: QPYS30.52-22-5 Build Date: Fri Jul 31 13:00:28 CDT 2020
OTHER MISC VERSION INFO: Subsidy Lock Config: slcf_rev_d_default_v1.0.nvm Regulatory Info (eLabel): regulatory_info_default.png Blur Version: Blur_Version.30.201.4.channel.retail.en.US Version when read from CPV: channel-user 10 QPYS30.52-22-5 421e1 release-keys
AB Update Enabled: True Full Treble Enabled: True
Command:
fastboot getvar max-sparse-size fastboot oem fb_mode_set fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash modem NON-HLOS.bin fastboot flash fsg fsg.mbn fastbooterase modemst1 fastbooterase modemst2 fastboot flash dsp adspso.bin fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system system.img_sparsechunk.5 fastboot flash system system.img_sparsechunk.6 fastboot flash system system.img_sparsechunk.7 fastboot flash system system.img_sparsechunk.8 fastboot flash system_b system_b.img_sparsechunk.0 fastboot flash system_b system_b.img_sparsechunk.1 fastboot flash system_b system_b.img_sparsechunk.2 fastboot flash vendor vendor.img_sparsechunk.0 fastboot flash vendor vendor.img_sparsechunk.1 fastboot flash oem oem.img fastboot flash oem_b oem_other.img fastbooterase userdata fastbooterase DDR fastboot oem fb_mode_clear echo ----------------------------------------------------------------------------------------------- echo English - Process concluded! echo Português - Processo concluído! echo English - Press any key to restart the phone! echo Português - Pressione qualquer tecla para reiniciar o celular! echo ----------------------------------------------------------------------------------------------- pause fastboot reboot exit
# # system props for the cne module # persist.vendor.cne.feature=1
#system props for the MM modules media.msm8956hw=0 mm.enable.smoothstreaming=true mmp.enable.3g2=true media.aac_51_output_enabled=true av.debug.disable.pers.cache=1 media.settings.xml=/vendor/etc/media_profiles_vendor.xml
#minimum duration for offload playback in secs audio.offload.min.duration.secs=30
#enable offload audio video playback by default audio.offload.video=true
#enable music through deep buffer audio.deep_buffer.media=true
#Audio voice concurrency related flags voice.playback.conc.disabled=true voice.record.conc.disabled=false voice.voip.conc.disabled=true #Decides the audio fallback path during voice call, deep-buffer and fast are the two allowed fallback paths now. voice.conc.fallbackpath=deep-buffer
#parser input buffer size(256kb) in byte stream mode vendor.audio.parser.ip.buffer.size=262144
# # system props for the data modules # ro.vendor.use_data_netmgrd=true persist.vendor.data.mode=concurrent
#system props for time-services persist.timed.enable=true
#system prop for Bluetooth SOC type ro.bluetooth.library_name=libbluetooth_qti.so persist.vendor.btstack.enable.splita2dp=false
# System property for cabl ro.qualcomm.cabl=0 ro.vendor.display.cabl=0
# # System props for telephony # System prop to turn on CdmaLTEPhone always telephony.lteOnCdmaDevice=1
# # System props for bluetooh # System prop to turn on hfp client bluetooth.hfp.client=1
#Simulate sdcard on /data/media # persist.fuse_sdcard=true
# #snapdragon value add features # ro.qc.sdk.audio.ssr=false ##fluencetype can be "fluence" or "fluencepro" or "none" ro.vendor.audio.sdk.fluencetype=none persist.vendor.audio.fluence.voicecall=true persist.vendor.audio.fluence.voicerec=false persist.vendor.audio.fluence.speaker=true #Set for titanium tunnel.audio.encode = false #Buffer size in kbytes for compress offload playback audio.offload.buffer.size.kb=64 #Minimum duration for offload playback in secs audio.offload.min.duration.secs=30 #Enable offload audio video playback by default audio.offload.video=true
#Enable PCM offload by default #audio.offload.pcm.16bit.enable=true #audio.offload.pcm.24bit.enable=true
#Enable audio track offload by default audio.offload.track.enable=true
#Enable music through deep buffer audio.deep_buffer.media=true
#enable downsampling for multi-channel content > 48Khz audio.playback.mch.downsample=true
#disable voice path for PCM VoIP by default use.voice.path.for.pcm.voip=false ro.config.vc_call_vol_steps=8
#enable software decoders for ALAC and APE. use.qti.sw.alac.decoder=true use.qti.sw.ape.decoder=true
#System property for FM transmitter ro.fm.transmitter=false
#enable dsp gapless mode by default audio.offload.gapless.enabled=true
#enable pbe effects vendor.audio.safx.pbe.enabled=true #property for AudioSphere Post processing audio.pp.asphere.enabled=false
#property to enable user to access Google WFD settings #persist.debug.wfd.enable=1 #property to enable VDS WFD solution persist.hwc.enable_vds=1
#selects CoreSight configuration to enable persist.debug.coresight.config=stm-events
#selects Console configuration to enable persist.console.silent.config=1
#property to enable narrow search range for video encoding vendor.vidc.enc.disable_bframes=1 vendor.vidc.disable.split.mode=1 vendor.vidc.dec.downscalar_width=1920 vendor.vidc.dec.downscalar_height=1088
#prefer HW codec over SW for thumbnail media.stagefright.thumbnail.prefer_hw_codecs=true
# system prop for UBWC vendor.video.disable.ubwc=1
# disable PQ feature by default vendor.vidc.enc.disable.pq=true
# Additional buffers shared between Camera and Video vidc.enc.dcvs.extra-buff-count=2
# system property to accelerate Progressive Download using STA persist.mm.sta.enable=0
VERSION INFO FOUND UNDER ABOUT PHONE SCREEN: System Version: 30.201.2.channel.retail.en.US Model Number: moto g(7) play Android Version: 10 Build Id: QPYS30.52-22-2 SW Display Build ID: QPYS30.52-22-2 Build Date: Sun May 31 22:19:33 CDT 2020
OTHER MISC VERSION INFO: Subsidy Lock Config: slcf_rev_d_default_v1.0.nvm Regulatory Info (eLabel): regulatory_info_default.png Blur Version: Blur_Version.30.201.2.channel.retail.en.US Version when read from CPV: channel-user 10 QPYS30.52-22-2 e09f2 release-keys
AB Update Enabled: True Full Treble Enabled: True
Command:
fastboot getvar max-sparse-size fastboot oem fb_mode_set fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash modem NON-HLOS.bin fastboot flash fsg fsg.mbn fastbooterase modemst1 fastbooterase modemst2 fastboot flash dsp adspso.bin fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system system.img_sparsechunk.5 fastboot flash system system.img_sparsechunk.6 fastboot flash system system.img_sparsechunk.7 fastboot flash system system.img_sparsechunk.8 fastboot flash system_b system_b.img_sparsechunk.0 fastboot flash system_b system_b.img_sparsechunk.1 fastboot flash system_b system_b.img_sparsechunk.2 fastboot flash vendor vendor.img_sparsechunk.0 fastboot flash vendor vendor.img_sparsechunk.1 fastboot flash oem oem.img fastboot flash oem_b oem_other.img fastbooterase userdata fastbooterase DDR fastboot oem fb_mode_clear echo ----------------------------------------------------------------------------------------------- echo English - Process concluded! echo Português - Processo concluído! echo English - Press any key to restart the phone! echo Português - Pressione qualquer tecla para reiniciar o celular! echo ----------------------------------------------------------------------------------------------- pause fastboot reboot exit
VERSION INFO FOUND UNDER ABOUT PHONE SCREEN: System Version: 30.201.13.channel.retail.en.US Model Number: moto g(7) play Android Version: 10 Build Id: QPYS30.52-22-12 SW Display Build ID: QPYS30.52-22-12 Build Date: Mon Nov 30 21:30:32 CST 2020
OTHER MISC VERSION INFO: Subsidy Lock Config: slcf_rev_d_default_v1.0.nvm Regulatory Info (eLabel): regulatory_info_default.png eLabel SHA1: da39a3ee5e6b4b0d3255bfef95601890afd80709 Blur Version: Blur_Version.30.201.13.channel.retail.en.US Version when read from CPV: channel-user 10 QPYS30.52-22-12 52aae release-keys
AB Update Enabled: True Full Treble Enabled: True
Command:
fastboot getvar max-sparse-size fastboot oem fb_mode_set fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash modem NON-HLOS.bin fastboot flash fsg fsg.mbn fastbooterase modemst1 fastbooterase modemst2 fastboot flash dsp adspso.bin fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system system.img_sparsechunk.5 fastboot flash system system.img_sparsechunk.6 fastboot flash system system.img_sparsechunk.7 fastboot flash system system.img_sparsechunk.8 fastboot flash system_b system_b.img_sparsechunk.0 fastboot flash system_b system_b.img_sparsechunk.1 fastboot flash system_b system_b.img_sparsechunk.2 fastboot flash vendor vendor.img_sparsechunk.0 fastboot flash vendor vendor.img_sparsechunk.1 fastboot flash oem oem.img fastboot flash oem_b oem_other.img fastbooterase userdata fastbooterase DDR fastboot oem fb_mode_clear echo ----------------------------------------------------------------------------------------------- echo English - Process concluded! echo Português - Processo concluído! echo English - Press any key to restart the phone! echo Português - Pressione qualquer tecla para reiniciar o celular! echo ----------------------------------------------------------------------------------------------- pause fastboot reboot exit
#Property to enable display default color mode vendor.display.enable_default_color_mode=1
# Display Properties as per treble compliance vendor.gralloc.enable_fb_ubwc=1 vendor.display.disable_skip_validate=1
#ro.hdmi.enable=true #tunnel.decode=true
# # system props for the cne module # persist.vendor.cne.feature=1
#system props for the MM modules media.msm8956hw=0 mm.enable.smoothstreaming=true mmp.enable.3g2=true media.aac_51_output_enabled=true av.debug.disable.pers.cache=1 media.settings.xml=/vendor/etc/media_profiles_vendor.xml
#minimum duration for offload playback in secs audio.offload.min.duration.secs=30
#enable offload audio video playback by default audio.offload.video=true
#enable music through deep buffer audio.deep_buffer.media=true
# # system props for the data modules # ro.vendor.use_data_netmgrd=true persist.vendor.data.mode=concurrent
#system props for time-services persist.timed.enable=true
#system prop for Bluetooth SOC type ro.bluetooth.library_name=libbluetooth_qti.so persist.vendor.btstack.enable.splita2dp=false
# System property for cabl ro.qualcomm.cabl=0 ro.vendor.display.cabl=0
# # System props for telephony # System prop to turn on CdmaLTEPhone always telephony.lteOnCdmaDevice=1 # # System props for bluetooh # System prop to turn on hfp client bluetooth.hfp.client=1
#Simulate sdcard on /data/media # persist.fuse_sdcard=true
# #System property for FM transmitter # ro.fm.transmitter=false
# set max background services ro.config.max_starting_bg=8
#property to enable user to access Google WFD settings #persist.debug.wfd.enable=1
#property to enable VDS WFD solution persist.hwc.enable_vds=1
#selects CoreSight configuration to enable persist.debug.coresight.config=stm-events
#property for vendor specific library ro.vendor.gt_library=libqti-gt.so ro.vendor.at_library=libqti-at.so
#property for game detection feature vendor.debug.enable.gamed=0
#property to enable narrow search range for video encoding vendor.vidc.enc.disable_bframes=1 vendor.vidc.disable.split.mode=1 vendor.vidc.dec.downscalar_width=1920 vendor.vidc.dec.downscalar_height=1088
# system prop for UBWC vendor.video.disable.ubwc=1
# disable PQ feature by default vendor.vidc.enc.disable.pq=true
# Additional buffers shared between Camera and Video vidc.enc.dcvs.extra-buff-count=2
# system property to accelerate Progressive Download using STA persist.mm.sta.enable=0
#property to enable fingerprint persist.qfp=false
#min/max cpu in core control ro.vendor.qti.core_ctl_min_cpu=2 ro.vendor.qti.core_ctl_max_cpu=4
#Enable B service adj transition by default ro.vendor.qti.sys.fw.bservice_enable=true ro.vendor.qti.sys.fw.bservice_limit=5 ro.vendor.qti.sys.fw.bservice_age=5000
# Enable Delay Service Restart ro.vendor.qti.am.reschedule_service=true
# set cutoff voltage to 3400mV ro.cutoff_voltage_mv=3400
#set device emmc size ro.emmc_size=16GB
#force HAL1 for below packages vendor.camera.hal1.packagelist=com.skype.raider,com.google.android.talk
#Enable FR27607-RIL to send ONLINE cmd in bootup #persist.radio.poweron_opt=1
#low power mode for camera vendor.camera.lowpower.record.enable=1
#properties for limiting preview size in camera persist.vendor.camera.display.umax=1920x1080 persist.vendor.camera.display.lmax=1280x720
#expose aux camera for below packages vendor.camera.aux.packagelist=org.codeaurora.snapcam
#set cutoff voltage to 3400mV ro.cutoff_voltage_mv=3400
# ro.location properties below are used in conjunction # with NLP_MODE setting in /vendor/etc/izat.conf # either as the main network provider or as a fallback # provider depending on NLP_MODE that is set # These properties are optional and will not cause # issues if not set to existing packages. # ro.location.osnlp.package sets the name of default # OS sepecific network location provider package to use # ro.location.osnlp.region.package is set to the name # of the alternative network location provider package # to be used for a particular region where the default # network location provider is not functional ro.location.osnlp.package=com.google.android.gms ro.location.osnlp.region.package=
VERSION INFO FOUND UNDER ABOUT PHONE SCREEN: System Version: 29.231.4.channel.retail.en.US Model Number: moto g(7) play Android Version: 9 Baseband Version: M632_17.61.01.99R Build Id: PPYS29.105-57-4 SW Display Build ID: PPYS29.105-57-4 Build Date: Tue Jun 18 14:58:19 CDT 2019
OTHER MISC VERSION INFO: Subsidy Lock Config: slcf_rev_d_default_v1.0.nvm Regulatory Info (eLabel): regulatory_info_default.png Blur Version: Blur_Version.29.231.4.channel.retail.en.US Version when read from CPV: channel-user 9 PPYS29.105-57-4 d6c0f release-keys
AB Update Enabled: True Full Treble Enabled: True
Command:
fastboot getvar max-sparse-size fastboot oem fb_mode_set fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash modem NON-HLOS.bin fastboot flash fsg fsg.mbn fastbooterase modemst1 fastbooterase modemst2 fastboot flash dsp adspso.bin fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system system.img_sparsechunk.5 fastboot flash system system.img_sparsechunk.6 fastboot flash system system.img_sparsechunk.7 fastboot flash system_b system_b.img_sparsechunk.0 fastboot flash system_b system_b.img_sparsechunk.1 fastboot flash system_b system_b.img_sparsechunk.2 fastboot flash vendor vendor.img fastboot flash oem oem.img fastboot flash oem_b oem_other.img fastbooterase userdata fastbooterase DDR fastboot oem fb_mode_clear echo ----------------------------------------------------------------------------------------------- echo English - Process concluded! echo Português - Processo concluído! echo English - Press any key to restart the phone! echo Português - Pressione qualquer tecla para reiniciar o celular! echo ----------------------------------------------------------------------------------------------- pause fastboot reboot exit
#Property to enable display default color mode vendor.display.enable_default_color_mode=1
# Display Properties as per treble compliance vendor.gralloc.enable_fb_ubwc=1 vendor.display.disable_skip_validate=1
#ro.hdmi.enable=true #tunnel.decode=true
# # system props for the cne module # persist.vendor.cne.feature=1
#system props for the MM modules media.msm8956hw=0 mm.enable.smoothstreaming=true mmp.enable.3g2=true media.aac_51_output_enabled=true av.debug.disable.pers.cache=1 media.settings.xml=/vendor/etc/media_profiles_vendor.xml
#minimum duration for offload playback in secs audio.offload.min.duration.secs=30
#enable offload audio video playback by default audio.offload.video=true
#enable music through deep buffer audio.deep_buffer.media=true
# # system props for the data modules # ro.vendor.use_data_netmgrd=true persist.vendor.data.mode=concurrent
#system props for time-services persist.timed.enable=true
#system prop for Bluetooth SOC type ro.bluetooth.library_name=libbluetooth_qti.so persist.vendor.btstack.enable.splita2dp=false
# System property for cabl ro.qualcomm.cabl=0 ro.vendor.display.cabl=0
# # System props for telephony # System prop to turn on CdmaLTEPhone always telephony.lteOnCdmaDevice=1 # # System props for bluetooh # System prop to turn on hfp client bluetooth.hfp.client=1
#Simulate sdcard on /data/media # persist.fuse_sdcard=true
# #System property for FM transmitter # ro.fm.transmitter=false
# set max background services ro.config.max_starting_bg=8
#property to enable user to access Google WFD settings #persist.debug.wfd.enable=1
#property to enable VDS WFD solution persist.hwc.enable_vds=1
#selects CoreSight configuration to enable persist.debug.coresight.config=stm-events
#property for vendor specific library ro.vendor.gt_library=libqti-gt.so ro.vendor.at_library=libqti-at.so
#property for game detection feature vendor.debug.enable.gamed=0
#property to enable narrow search range for video encoding vendor.vidc.enc.disable_bframes=1 vendor.vidc.disable.split.mode=1 vendor.vidc.dec.downscalar_width=1920 vendor.vidc.dec.downscalar_height=1088
# system prop for UBWC vendor.video.disable.ubwc=1
# disable PQ feature by default vendor.vidc.enc.disable.pq=true
# Additional buffers shared between Camera and Video vidc.enc.dcvs.extra-buff-count=2
# system property to accelerate Progressive Download using STA persist.mm.sta.enable=0
#property to enable fingerprint persist.qfp=false
#min/max cpu in core control ro.vendor.qti.core_ctl_min_cpu=2 ro.vendor.qti.core_ctl_max_cpu=4
#Enable B service adj transition by default ro.vendor.qti.sys.fw.bservice_enable=true ro.vendor.qti.sys.fw.bservice_limit=5 ro.vendor.qti.sys.fw.bservice_age=5000
# Enable Delay Service Restart ro.vendor.qti.am.reschedule_service=true
# set cutoff voltage to 3400mV ro.cutoff_voltage_mv=3400
#set device emmc size ro.emmc_size=16GB
#force HAL1 for below packages vendor.camera.hal1.packagelist=com.skype.raider,com.google.android.talk
#Enable FR27607-RIL to send ONLINE cmd in bootup #persist.radio.poweron_opt=1
#low power mode for camera vendor.camera.lowpower.record.enable=1
#properties for limiting preview size in camera persist.vendor.camera.display.umax=1920x1080 persist.vendor.camera.display.lmax=1280x720
#expose aux camera for below packages vendor.camera.aux.packagelist=org.codeaurora.snapcam
#set cutoff voltage to 3400mV ro.cutoff_voltage_mv=3400
# ro.location properties below are used in conjunction # with NLP_MODE setting in /vendor/etc/izat.conf # either as the main network provider or as a fallback # provider depending on NLP_MODE that is set # These properties are optional and will not cause # issues if not set to existing packages. # ro.location.osnlp.package sets the name of default # OS sepecific network location provider package to use # ro.location.osnlp.region.package is set to the name # of the alternative network location provider package # to be used for a particular region where the default # network location provider is not functional ro.location.osnlp.package=com.google.android.gms ro.location.osnlp.region.package=
VERSION INFO FOUND UNDER ABOUT PHONE SCREEN: System Version: 29.301.11.channel.retail.en.US Model Number: moto g(7) play Android Version: 9 Baseband Version: M632_26.100.01.120.01R Build Id: PPYS29.105-134-9 SW Display Build ID: PPYS29.105-134-9 Build Date: Mon Feb 10 12:39:21 CST 2020
OTHER MISC VERSION INFO: Subsidy Lock Config: slcf_rev_d_default_v1.0.nvm Regulatory Info (eLabel): regulatory_info_default.png Blur Version: Blur_Version.29.301.11.channel.retail.en.US Version when read from CPV: channel-user 9 PPYS29.105-134-9 cd8e0 release-keys
AB Update Enabled: True Full Treble Enabled: True
Command:
fastboot getvar max-sparse-size fastboot oem fb_mode_set fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash modem NON-HLOS.bin fastboot flash fsg fsg.mbn fastbooterase modemst1 fastbooterase modemst2 fastboot flash dsp adspso.bin fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system system.img_sparsechunk.5 fastboot flash system system.img_sparsechunk.6 fastboot flash system system.img_sparsechunk.7 fastboot flash system_b system_b.img_sparsechunk.0 fastboot flash system_b system_b.img_sparsechunk.1 fastboot flash vendor vendor.img fastboot flash oem oem.img fastboot flash oem_b oem_other.img fastbooterase userdata fastbooterase DDR fastboot oem fb_mode_clear echo ----------------------------------------------------------------------------------------------- echo English - Process concluded! echo Português - Processo concluído! echo English - Press any key to restart the phone! echo Português - Pressione qualquer tecla para reiniciar o celular! echo ----------------------------------------------------------------------------------------------- pause fastboot reboot exit
#Property to enable display default color mode vendor.display.enable_default_color_mode=1
# Display Properties as per treble compliance vendor.gralloc.enable_fb_ubwc=1 vendor.display.disable_skip_validate=1
#ro.hdmi.enable=true #tunnel.decode=true
# # system props for the cne module # persist.vendor.cne.feature=1
#system props for the MM modules media.msm8956hw=0 mm.enable.smoothstreaming=true mmp.enable.3g2=true media.aac_51_output_enabled=true av.debug.disable.pers.cache=1 media.settings.xml=/vendor/etc/media_profiles_vendor.xml
#minimum duration for offload playback in secs audio.offload.min.duration.secs=30
#enable offload audio video playback by default audio.offload.video=true
#enable music through deep buffer audio.deep_buffer.media=true
# # system props for the data modules # ro.vendor.use_data_netmgrd=true persist.vendor.data.mode=concurrent
#system props for time-services persist.timed.enable=true
#system prop for Bluetooth SOC type ro.bluetooth.library_name=libbluetooth_qti.so persist.vendor.btstack.enable.splita2dp=false
# System property for cabl ro.qualcomm.cabl=0 ro.vendor.display.cabl=0
# # System props for telephony # System prop to turn on CdmaLTEPhone always telephony.lteOnCdmaDevice=1 # # System props for bluetooh # System prop to turn on hfp client bluetooth.hfp.client=1
#Simulate sdcard on /data/media # persist.fuse_sdcard=true
# #System property for FM transmitter # ro.fm.transmitter=false
# set max background services ro.config.max_starting_bg=8
#property to enable user to access Google WFD settings #persist.debug.wfd.enable=1
#property to enable VDS WFD solution persist.hwc.enable_vds=1
#selects CoreSight configuration to enable persist.debug.coresight.config=stm-events
#property for vendor specific library ro.vendor.gt_library=libqti-gt.so ro.vendor.at_library=libqti-at.so
#property for game detection feature vendor.debug.enable.gamed=0
#property to enable narrow search range for video encoding vendor.vidc.enc.disable_bframes=1 vendor.vidc.disable.split.mode=1 vendor.vidc.dec.downscalar_width=1920 vendor.vidc.dec.downscalar_height=1088
# system prop for UBWC vendor.video.disable.ubwc=1
# disable PQ feature by default vendor.vidc.enc.disable.pq=true
# Additional buffers shared between Camera and Video vidc.enc.dcvs.extra-buff-count=2
# system property to accelerate Progressive Download using STA persist.mm.sta.enable=0
#property to enable fingerprint persist.qfp=false
#min/max cpu in core control ro.vendor.qti.core_ctl_min_cpu=2 ro.vendor.qti.core_ctl_max_cpu=4
#Enable B service adj transition by default ro.vendor.qti.sys.fw.bservice_enable=true ro.vendor.qti.sys.fw.bservice_limit=5 ro.vendor.qti.sys.fw.bservice_age=5000
# Enable Delay Service Restart ro.vendor.qti.am.reschedule_service=true
# set cutoff voltage to 3400mV ro.cutoff_voltage_mv=3400
#set device emmc size ro.emmc_size=16GB
#force HAL1 for below packages vendor.camera.hal1.packagelist=com.skype.raider,com.google.android.talk
#Enable FR27607-RIL to send ONLINE cmd in bootup #persist.radio.poweron_opt=1
#low power mode for camera vendor.camera.lowpower.record.enable=1
#properties for limiting preview size in camera persist.vendor.camera.display.umax=1920x1080 persist.vendor.camera.display.lmax=1280x720
#expose aux camera for below packages vendor.camera.aux.packagelist=org.codeaurora.snapcam
#set cutoff voltage to 3400mV ro.cutoff_voltage_mv=3400
# ro.location properties below are used in conjunction # with NLP_MODE setting in /vendor/etc/izat.conf # either as the main network provider or as a fallback # provider depending on NLP_MODE that is set # These properties are optional and will not cause # issues if not set to existing packages. # ro.location.osnlp.package sets the name of default # OS sepecific network location provider package to use # ro.location.osnlp.region.package is set to the name # of the alternative network location provider package # to be used for a particular region where the default # network location provider is not functional ro.location.osnlp.package=com.google.android.gms ro.location.osnlp.region.package=
VERSION INFO FOUND UNDER ABOUT PHONE SCREEN: System Version: 29.301.9.channel.retail.en.US Model Number: moto g(7) play Android Version: 9 Baseband Version: M632_26.100.01.120.01R Build Id: PPYS29.105-134-7 SW Display Build ID: PPYS29.105-134-7 Build Date: Wed Nov 27 06:09:02 CST 2019
OTHER MISC VERSION INFO: Subsidy Lock Config: slcf_rev_d_default_v1.0.nvm Regulatory Info (eLabel): regulatory_info_default.png Blur Version: Blur_Version.29.301.9.channel.retail.en.US Version when read from CPV: channel-user 9 PPYS29.105-134-7 fbb95 release-keys
AB Update Enabled: True Full Treble Enabled: True
Command:
fastboot getvar max-sparse-size fastboot oem fb_mode_set fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash modem NON-HLOS.bin fastboot flash fsg fsg.mbn fastbooterase modemst1 fastbooterase modemst2 fastboot flash dsp adspso.bin fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system system.img_sparsechunk.5 fastboot flash system system.img_sparsechunk.6 fastboot flash system system.img_sparsechunk.7 fastboot flash system_b system_b.img_sparsechunk.0 fastboot flash system_b system_b.img_sparsechunk.1 fastboot flash vendor vendor.img fastboot flash oem oem.img fastboot flash oem_b oem_other.img fastbooterase userdata fastbooterase DDR fastboot oem fb_mode_clear echo ----------------------------------------------------------------------------------------------- echo English - Process concluded! echo Português - Processo concluído! echo English - Press any key to restart the phone! echo Português - Pressione qualquer tecla para reiniciar o celular! echo ----------------------------------------------------------------------------------------------- pause fastboot reboot exit
#Property to enable display default color mode vendor.display.enable_default_color_mode=1
# Display Properties as per treble compliance vendor.gralloc.enable_fb_ubwc=1 vendor.display.disable_skip_validate=1
#ro.hdmi.enable=true #tunnel.decode=true
# # system props for the cne module # persist.vendor.cne.feature=1
#system props for the MM modules media.msm8956hw=0 mm.enable.smoothstreaming=true mmp.enable.3g2=true media.aac_51_output_enabled=true av.debug.disable.pers.cache=1 media.settings.xml=/vendor/etc/media_profiles_vendor.xml
#minimum duration for offload playback in secs audio.offload.min.duration.secs=30
#enable offload audio video playback by default audio.offload.video=true
#enable music through deep buffer audio.deep_buffer.media=true
# # system props for the data modules # ro.vendor.use_data_netmgrd=true persist.vendor.data.mode=concurrent
#system props for time-services persist.timed.enable=true
#system prop for Bluetooth SOC type ro.bluetooth.library_name=libbluetooth_qti.so persist.vendor.btstack.enable.splita2dp=false
# System property for cabl ro.qualcomm.cabl=0 ro.vendor.display.cabl=0
# # System props for telephony # System prop to turn on CdmaLTEPhone always telephony.lteOnCdmaDevice=1 # # System props for bluetooh # System prop to turn on hfp client bluetooth.hfp.client=1
#Simulate sdcard on /data/media # persist.fuse_sdcard=true
# #System property for FM transmitter # ro.fm.transmitter=false
# set max background services ro.config.max_starting_bg=8
#property to enable user to access Google WFD settings #persist.debug.wfd.enable=1
#property to enable VDS WFD solution persist.hwc.enable_vds=1
#selects CoreSight configuration to enable persist.debug.coresight.config=stm-events
#property for vendor specific library ro.vendor.gt_library=libqti-gt.so ro.vendor.at_library=libqti-at.so
#property for game detection feature vendor.debug.enable.gamed=0
#property to enable narrow search range for video encoding vendor.vidc.enc.disable_bframes=1 vendor.vidc.disable.split.mode=1 vendor.vidc.dec.downscalar_width=1920 vendor.vidc.dec.downscalar_height=1088
# system prop for UBWC vendor.video.disable.ubwc=1
# disable PQ feature by default vendor.vidc.enc.disable.pq=true
# Additional buffers shared between Camera and Video vidc.enc.dcvs.extra-buff-count=2
# system property to accelerate Progressive Download using STA persist.mm.sta.enable=0
#property to enable fingerprint persist.qfp=false
#min/max cpu in core control ro.vendor.qti.core_ctl_min_cpu=2 ro.vendor.qti.core_ctl_max_cpu=4
#Enable B service adj transition by default ro.vendor.qti.sys.fw.bservice_enable=true ro.vendor.qti.sys.fw.bservice_limit=5 ro.vendor.qti.sys.fw.bservice_age=5000
# Enable Delay Service Restart ro.vendor.qti.am.reschedule_service=true
# set cutoff voltage to 3400mV ro.cutoff_voltage_mv=3400
#set device emmc size ro.emmc_size=16GB
#force HAL1 for below packages vendor.camera.hal1.packagelist=com.skype.raider,com.google.android.talk
#Enable FR27607-RIL to send ONLINE cmd in bootup #persist.radio.poweron_opt=1
#low power mode for camera vendor.camera.lowpower.record.enable=1
#properties for limiting preview size in camera persist.vendor.camera.display.umax=1920x1080 persist.vendor.camera.display.lmax=1280x720
#expose aux camera for below packages vendor.camera.aux.packagelist=org.codeaurora.snapcam
#set cutoff voltage to 3400mV ro.cutoff_voltage_mv=3400
# ro.location properties below are used in conjunction # with NLP_MODE setting in /vendor/etc/izat.conf # either as the main network provider or as a fallback # provider depending on NLP_MODE that is set # These properties are optional and will not cause # issues if not set to existing packages. # ro.location.osnlp.package sets the name of default # OS sepecific network location provider package to use # ro.location.osnlp.region.package is set to the name # of the alternative network location provider package # to be used for a particular region where the default # network location provider is not functional ro.location.osnlp.package=com.google.android.gms ro.location.osnlp.region.package=
VERSION INFO FOUND UNDER ABOUT PHONE SCREEN: System Version: 29.291.4.channel.retail.en.US Model Number: moto g(7) play Android Version: 9 Baseband Version: M632_26.100.01.120.01R Build Id: PPYS29.105-134-4 SW Display Build ID: PPYS29.105-134-4 Build Date: Mon Sep 23 15:16:25 CDT 2019
OTHER MISC VERSION INFO: Subsidy Lock Config: slcf_rev_d_default_v1.0.nvm Regulatory Info (eLabel): regulatory_info_default.png Blur Version: Blur_Version.29.291.4.channel.retail.en.US Version when read from CPV: channel-user 9 PPYS29.105-134-4 36d3c release-keys
AB Update Enabled: True Full Treble Enabled: True
Command:
fastboot getvar max-sparse-size fastboot oem fb_mode_set fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash modem NON-HLOS.bin fastboot flash fsg fsg.mbn fastbooterase modemst1 fastbooterase modemst2 fastboot flash dsp adspso.bin fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system system.img_sparsechunk.5 fastboot flash system system.img_sparsechunk.6 fastboot flash system system.img_sparsechunk.7 fastboot flash system_b system_b.img_sparsechunk.0 fastboot flash system_b system_b.img_sparsechunk.1 fastboot flash vendor vendor.img fastboot flash oem oem.img fastboot flash oem_b oem_other.img fastbooterase userdata fastbooterase DDR fastboot oem fb_mode_clear echo ----------------------------------------------------------------------------------------------- echo English - Process concluded! echo Português - Processo concluído! echo English - Press any key to restart the phone! echo Português - Pressione qualquer tecla para reiniciar o celular! echo ----------------------------------------------------------------------------------------------- pause fastboot reboot exit
#Property to enable display default color mode vendor.display.enable_default_color_mode=1
# Display Properties as per treble compliance vendor.gralloc.enable_fb_ubwc=1 vendor.display.disable_skip_validate=1
#ro.hdmi.enable=true #tunnel.decode=true
# # system props for the cne module # persist.vendor.cne.feature=1
#system props for the MM modules media.msm8956hw=0 mm.enable.smoothstreaming=true mmp.enable.3g2=true media.aac_51_output_enabled=true av.debug.disable.pers.cache=1 media.settings.xml=/vendor/etc/media_profiles_vendor.xml
#minimum duration for offload playback in secs audio.offload.min.duration.secs=30
#enable offload audio video playback by default audio.offload.video=true
#enable music through deep buffer audio.deep_buffer.media=true
# # system props for the data modules # ro.vendor.use_data_netmgrd=true persist.vendor.data.mode=concurrent
#system props for time-services persist.timed.enable=true
#system prop for Bluetooth SOC type ro.bluetooth.library_name=libbluetooth_qti.so persist.vendor.btstack.enable.splita2dp=false
# System property for cabl ro.qualcomm.cabl=0 ro.vendor.display.cabl=0
# # System props for telephony # System prop to turn on CdmaLTEPhone always telephony.lteOnCdmaDevice=1 # # System props for bluetooh # System prop to turn on hfp client bluetooth.hfp.client=1
#Simulate sdcard on /data/media # persist.fuse_sdcard=true
# #System property for FM transmitter # ro.fm.transmitter=false
# set max background services ro.config.max_starting_bg=8
#property to enable user to access Google WFD settings #persist.debug.wfd.enable=1
#property to enable VDS WFD solution persist.hwc.enable_vds=1
#selects CoreSight configuration to enable persist.debug.coresight.config=stm-events
#property for vendor specific library ro.vendor.gt_library=libqti-gt.so ro.vendor.at_library=libqti-at.so
#property for game detection feature vendor.debug.enable.gamed=0
#property to enable narrow search range for video encoding vendor.vidc.enc.disable_bframes=1 vendor.vidc.disable.split.mode=1 vendor.vidc.dec.downscalar_width=1920 vendor.vidc.dec.downscalar_height=1088
# system prop for UBWC vendor.video.disable.ubwc=1
# disable PQ feature by default vendor.vidc.enc.disable.pq=true
# Additional buffers shared between Camera and Video vidc.enc.dcvs.extra-buff-count=2
# system property to accelerate Progressive Download using STA persist.mm.sta.enable=0
#property to enable fingerprint persist.qfp=false
#min/max cpu in core control ro.vendor.qti.core_ctl_min_cpu=2 ro.vendor.qti.core_ctl_max_cpu=4
#Enable B service adj transition by default ro.vendor.qti.sys.fw.bservice_enable=true ro.vendor.qti.sys.fw.bservice_limit=5 ro.vendor.qti.sys.fw.bservice_age=5000
# Enable Delay Service Restart ro.vendor.qti.am.reschedule_service=true
# set cutoff voltage to 3400mV ro.cutoff_voltage_mv=3400
#set device emmc size ro.emmc_size=16GB
#force HAL1 for below packages vendor.camera.hal1.packagelist=com.skype.raider,com.google.android.talk
#Enable FR27607-RIL to send ONLINE cmd in bootup #persist.radio.poweron_opt=1
#low power mode for camera vendor.camera.lowpower.record.enable=1
#properties for limiting preview size in camera persist.vendor.camera.display.umax=1920x1080 persist.vendor.camera.display.lmax=1280x720
#expose aux camera for below packages vendor.camera.aux.packagelist=org.codeaurora.snapcam
#set cutoff voltage to 3400mV ro.cutoff_voltage_mv=3400
# ro.location properties below are used in conjunction # with NLP_MODE setting in /vendor/etc/izat.conf # either as the main network provider or as a fallback # provider depending on NLP_MODE that is set # These properties are optional and will not cause # issues if not set to existing packages. # ro.location.osnlp.package sets the name of default # OS sepecific network location provider package to use # ro.location.osnlp.region.package is set to the name # of the alternative network location provider package # to be used for a particular region where the default # network location provider is not functional ro.location.osnlp.package=com.google.android.gms ro.location.osnlp.region.package=
VERSION INFO FOUND UNDER ABOUT PHONE SCREEN: System Version: 29.261.2.channel.retail.en.US Model Number: moto g(7) play Android Version: 9 Baseband Version: M632_26.100.01.120.01R Build Id: PPYS29.105-134-2 SW Display Build ID: PPYS29.105-134-2 Build Date: Sun Aug 4 01:14:27 CDT 2019
OTHER MISC VERSION INFO: Subsidy Lock Config: slcf_rev_d_default_v1.0.nvm Regulatory Info (eLabel): regulatory_info_default.png Blur Version: Blur_Version.29.261.2.channel.retail.en.US Version when read from CPV: channel-user 9 PPYS29.105-134-2 3d0d release-keys
AB Update Enabled: True Full Treble Enabled: True
Command:
fastboot getvar max-sparse-size fastboot oem fb_mode_set fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash modem NON-HLOS.bin fastboot flash fsg fsg.mbn fastbooterase modemst1 fastbooterase modemst2 fastboot flash dsp adspso.bin fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system system.img_sparsechunk.5 fastboot flash system system.img_sparsechunk.6 fastboot flash system system.img_sparsechunk.7 fastboot flash system_b system_b.img_sparsechunk.0 fastboot flash system_b system_b.img_sparsechunk.1 fastboot flash vendor vendor.img fastboot flash oem oem.img fastboot flash oem_b oem_other.img fastbooterase userdata fastbooterase DDR fastboot oem fb_mode_clear echo ----------------------------------------------------------------------------------------------- echo English - Process concluded! echo Português - Processo concluído! echo English - Press any key to restart the phone! echo Português - Pressione qualquer tecla para reiniciar o celular! echo ----------------------------------------------------------------------------------------------- pause fastboot reboot exit
#Property to enable display default color mode vendor.display.enable_default_color_mode=1
# Display Properties as per treble compliance vendor.gralloc.enable_fb_ubwc=1 vendor.display.disable_skip_validate=1
#ro.hdmi.enable=true #tunnel.decode=true
# # system props for the cne module # persist.vendor.cne.feature=1
#system props for the MM modules media.msm8956hw=0 mm.enable.smoothstreaming=true mmp.enable.3g2=true media.aac_51_output_enabled=true av.debug.disable.pers.cache=1 media.settings.xml=/vendor/etc/media_profiles_vendor.xml
#minimum duration for offload playback in secs audio.offload.min.duration.secs=30
#enable offload audio video playback by default audio.offload.video=true
#enable music through deep buffer audio.deep_buffer.media=true
# # system props for the data modules # ro.vendor.use_data_netmgrd=true persist.vendor.data.mode=concurrent
#system props for time-services persist.timed.enable=true
#system prop for Bluetooth SOC type ro.bluetooth.library_name=libbluetooth_qti.so persist.vendor.btstack.enable.splita2dp=false
# System property for cabl ro.qualcomm.cabl=0 ro.vendor.display.cabl=0
# # System props for telephony # System prop to turn on CdmaLTEPhone always telephony.lteOnCdmaDevice=1 # # System props for bluetooh # System prop to turn on hfp client bluetooth.hfp.client=1
#Simulate sdcard on /data/media # persist.fuse_sdcard=true
# #System property for FM transmitter # ro.fm.transmitter=false
# set max background services ro.config.max_starting_bg=8
#property to enable user to access Google WFD settings #persist.debug.wfd.enable=1
#property to enable VDS WFD solution persist.hwc.enable_vds=1
#selects CoreSight configuration to enable persist.debug.coresight.config=stm-events
#property for vendor specific library ro.vendor.gt_library=libqti-gt.so ro.vendor.at_library=libqti-at.so
#property for game detection feature vendor.debug.enable.gamed=0
#property to enable narrow search range for video encoding vendor.vidc.enc.disable_bframes=1 vendor.vidc.disable.split.mode=1 vendor.vidc.dec.downscalar_width=1920 vendor.vidc.dec.downscalar_height=1088
# system prop for UBWC vendor.video.disable.ubwc=1
# disable PQ feature by default vendor.vidc.enc.disable.pq=true
# Additional buffers shared between Camera and Video vidc.enc.dcvs.extra-buff-count=2
# system property to accelerate Progressive Download using STA persist.mm.sta.enable=0
#property to enable fingerprint persist.qfp=false
#min/max cpu in core control ro.vendor.qti.core_ctl_min_cpu=2 ro.vendor.qti.core_ctl_max_cpu=4
#Enable B service adj transition by default ro.vendor.qti.sys.fw.bservice_enable=true ro.vendor.qti.sys.fw.bservice_limit=5 ro.vendor.qti.sys.fw.bservice_age=5000
# Enable Delay Service Restart ro.vendor.qti.am.reschedule_service=true
# set cutoff voltage to 3400mV ro.cutoff_voltage_mv=3400
#set device emmc size ro.emmc_size=16GB
#force HAL1 for below packages vendor.camera.hal1.packagelist=com.skype.raider,com.google.android.talk
#Enable FR27607-RIL to send ONLINE cmd in bootup #persist.radio.poweron_opt=1
#low power mode for camera vendor.camera.lowpower.record.enable=1
#properties for limiting preview size in camera persist.vendor.camera.display.umax=1920x1080 persist.vendor.camera.display.lmax=1280x720
#expose aux camera for below packages vendor.camera.aux.packagelist=org.codeaurora.snapcam
#set cutoff voltage to 3400mV ro.cutoff_voltage_mv=3400
# ro.location properties below are used in conjunction # with NLP_MODE setting in /vendor/etc/izat.conf # either as the main network provider or as a fallback # provider depending on NLP_MODE that is set # These properties are optional and will not cause # issues if not set to existing packages. # ro.location.osnlp.package sets the name of default # OS sepecific network location provider package to use # ro.location.osnlp.region.package is set to the name # of the alternative network location provider package # to be used for a particular region where the default # network location provider is not functional ro.location.osnlp.package=com.google.android.gms ro.location.osnlp.region.package=
VERSION INFO FOUND UNDER ABOUT PHONE SCREEN: System Version: 29.301.23.channel.retail.en.US Model Number: moto g(7) play Android Version: 9 Build Id: PPYS29.105-134-12 SW Display Build ID: PPYS29.105-134-12 Build Date: Fri Apr 3 12:35:34 CDT 2020
OTHER MISC VERSION INFO: Subsidy Lock Config: slcf_rev_d_default_v1.0.nvm Regulatory Info (eLabel): regulatory_info_default.png Blur Version: Blur_Version.29.301.23.channel.retail.en.US Version when read from CPV: channel-user 9 PPYS29.105-134-12 99987 release-keys
AB Update Enabled: True Full Treble Enabled: True
Command:
fastboot getvar max-sparse-size fastboot oem fb_mode_set fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash modem NON-HLOS.bin fastboot flash fsg fsg.mbn fastbooterase modemst1 fastbooterase modemst2 fastboot flash dsp adspso.bin fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system system.img_sparsechunk.5 fastboot flash system system.img_sparsechunk.6 fastboot flash system system.img_sparsechunk.7 fastboot flash system_b system_b.img_sparsechunk.0 fastboot flash system_b system_b.img_sparsechunk.1 fastboot flash vendor vendor.img fastboot flash oem oem.img fastboot flash oem_b oem_other.img fastbooterase userdata fastbooterase DDR fastboot oem fb_mode_clear echo ----------------------------------------------------------------------------------------------- echo English - Process concluded! echo Português - Processo concluído! echo English - Press any key to restart the phone! echo Português - Pressione qualquer tecla para reiniciar o celular! echo ----------------------------------------------------------------------------------------------- pause fastboot reboot exit
#Property to enable display default color mode vendor.display.enable_default_color_mode=1
# Display Properties as per treble compliance vendor.gralloc.enable_fb_ubwc=1 vendor.display.disable_skip_validate=1
#ro.hdmi.enable=true #tunnel.decode=true
# # system props for the cne module # persist.vendor.cne.feature=1
#system props for the MM modules media.msm8956hw=0 mm.enable.smoothstreaming=true mmp.enable.3g2=true media.aac_51_output_enabled=true av.debug.disable.pers.cache=1 media.settings.xml=/vendor/etc/media_profiles_vendor.xml
#minimum duration for offload playback in secs audio.offload.min.duration.secs=30
#enable offload audio video playback by default audio.offload.video=true
#enable music through deep buffer audio.deep_buffer.media=true
# # system props for the data modules # ro.vendor.use_data_netmgrd=true persist.vendor.data.mode=concurrent
#system props for time-services persist.timed.enable=true
#system prop for Bluetooth SOC type ro.bluetooth.library_name=libbluetooth_qti.so persist.vendor.btstack.enable.splita2dp=false
# System property for cabl ro.qualcomm.cabl=0 ro.vendor.display.cabl=0
# # System props for telephony # System prop to turn on CdmaLTEPhone always telephony.lteOnCdmaDevice=1 # # System props for bluetooh # System prop to turn on hfp client bluetooth.hfp.client=1
#Simulate sdcard on /data/media # persist.fuse_sdcard=true
# #System property for FM transmitter # ro.fm.transmitter=false
# set max background services ro.config.max_starting_bg=8
#property to enable user to access Google WFD settings #persist.debug.wfd.enable=1
#property to enable VDS WFD solution persist.hwc.enable_vds=1
#selects CoreSight configuration to enable persist.debug.coresight.config=stm-events
#selects Console configuration to enable persist.console.silent.config=1
#property for vendor specific library ro.vendor.gt_library=libqti-gt.so ro.vendor.at_library=libqti-at.so
#property for game detection feature vendor.debug.enable.gamed=0
#property to enable narrow search range for video encoding vendor.vidc.enc.disable_bframes=1 vendor.vidc.disable.split.mode=1 vendor.vidc.dec.downscalar_width=1920 vendor.vidc.dec.downscalar_height=1088
# system prop for UBWC vendor.video.disable.ubwc=1
# disable PQ feature by default vendor.vidc.enc.disable.pq=true
# Additional buffers shared between Camera and Video vidc.enc.dcvs.extra-buff-count=2
# system property to accelerate Progressive Download using STA persist.mm.sta.enable=0
#property to enable fingerprint persist.qfp=false
#min/max cpu in core control ro.vendor.qti.core_ctl_min_cpu=2 ro.vendor.qti.core_ctl_max_cpu=4
#Enable B service adj transition by default ro.vendor.qti.sys.fw.bservice_enable=true ro.vendor.qti.sys.fw.bservice_limit=5 ro.vendor.qti.sys.fw.bservice_age=5000
# Enable Delay Service Restart ro.vendor.qti.am.reschedule_service=true
# set cutoff voltage to 3400mV ro.cutoff_voltage_mv=3400
#set device emmc size ro.emmc_size=16GB
#force HAL1 for below packages vendor.camera.hal1.packagelist=com.skype.raider,com.google.android.talk
#Enable FR27607-RIL to send ONLINE cmd in bootup #persist.radio.poweron_opt=1
#low power mode for camera vendor.camera.lowpower.record.enable=1
#properties for limiting preview size in camera persist.vendor.camera.display.umax=1920x1080 persist.vendor.camera.display.lmax=1280x720
#expose aux camera for below packages vendor.camera.aux.packagelist=org.codeaurora.snapcam
#set cutoff voltage to 3400mV ro.cutoff_voltage_mv=3400
# ro.location properties below are used in conjunction # with NLP_MODE setting in /vendor/etc/izat.conf # either as the main network provider or as a fallback # provider depending on NLP_MODE that is set # These properties are optional and will not cause # issues if not set to existing packages. # ro.location.osnlp.package sets the name of default # OS sepecific network location provider package to use # ro.location.osnlp.region.package is set to the name # of the alternative network location provider package # to be used for a particular region where the default # network location provider is not functional ro.location.osnlp.package=com.google.android.gms ro.location.osnlp.region.package=
VERSION INFO FOUND UNDER ABOUT PHONE SCREEN: System Version: 29.31.33.channel.retail.en.US Model Number: moto g(7) play Android Version: 9 Baseband Version: M632_05.34.01.73R Build Id: PPY29.68-28 SW Display Build ID: PPY29.68-28 Build Date: Tue Dec 11 11:04:25 CST 2018
OTHER MISC VERSION INFO: Subsidy Lock Config: slcf_rev_d_default_v1.0.nvm Regulatory Info (eLabel): regulatory_info_default.png Blur Version: Blur_Version.29.31.33.channel.retail.en.US Version when read from CPV: channel-user 9 PPY29.68-28 ccc25 release-keys
AB Update Enabled: True Full Treble Enabled: True
Command:
fastboot getvar max-sparse-size fastboot oem fb_mode_set fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash modem NON-HLOS.bin fastboot flash fsg fsg.mbn fastbooterase modemst1 fastbooterase modemst2 fastboot flash dsp adspso.bin fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system system.img_sparsechunk.5 fastboot flash system system.img_sparsechunk.6 fastboot flash system system.img_sparsechunk.7 fastboot flash system_b system_b.img_sparsechunk.0 fastboot flash system_b system_b.img_sparsechunk.1 fastboot flash vendor vendor.img fastboot flash oem oem.img fastboot flash oem_b oem_other.img fastbooterase userdata fastbooterase DDR fastboot oem fb_mode_clear echo ----------------------------------------------------------------------------------------------- echo English - Process concluded! echo Português - Processo concluído! echo English - Press any key to restart the phone! echo Português - Pressione qualquer tecla para reiniciar o celular! echo ----------------------------------------------------------------------------------------------- pause fastboot reboot exit
#Property to enable display default color mode vendor.display.enable_default_color_mode=1
# Display Properties as per treble compliance vendor.gralloc.enable_fb_ubwc=1 vendor.display.disable_skip_validate=1
#ro.hdmi.enable=true #tunnel.decode=true
# # system props for the cne module # persist.vendor.cne.feature=1
#system props for the MM modules media.msm8956hw=0 mm.enable.smoothstreaming=true mmp.enable.3g2=true media.aac_51_output_enabled=true av.debug.disable.pers.cache=1 media.settings.xml=/vendor/etc/media_profiles_vendor.xml
#minimum duration for offload playback in secs audio.offload.min.duration.secs=30
#enable offload audio video playback by default audio.offload.video=true
#enable music through deep buffer audio.deep_buffer.media=true
# # system props for the data modules # ro.vendor.use_data_netmgrd=true persist.vendor.data.mode=concurrent
#system props for time-services persist.timed.enable=true
#system prop for Bluetooth SOC type ro.bluetooth.library_name=libbluetooth_qti.so persist.vendor.btstack.enable.splita2dp=false
# System property for cabl ro.qualcomm.cabl=0 ro.vendor.display.cabl=0
# # System props for telephony # System prop to turn on CdmaLTEPhone always telephony.lteOnCdmaDevice=1 # # System props for bluetooh # System prop to turn on hfp client bluetooth.hfp.client=1
#Simulate sdcard on /data/media # persist.fuse_sdcard=true
# #System property for FM transmitter # ro.fm.transmitter=false
# set max background services ro.config.max_starting_bg=8
#property to enable user to access Google WFD settings #persist.debug.wfd.enable=1
#property to enable VDS WFD solution persist.hwc.enable_vds=1
#selects CoreSight configuration to enable persist.debug.coresight.config=stm-events
#property for vendor specific library ro.vendor.gt_library=libqti-gt.so ro.vendor.at_library=libqti-at.so
#property for game detection feature vendor.debug.enable.gamed=0
#property to enable narrow search range for video encoding vendor.vidc.enc.disable_bframes=1 vendor.vidc.disable.split.mode=1 vendor.vidc.dec.downscalar_width=1920 vendor.vidc.dec.downscalar_height=1088
# system prop for UBWC vendor.video.disable.ubwc=1
# disable PQ feature by default vendor.vidc.enc.disable.pq=true
# Additional buffers shared between Camera and Video vidc.enc.dcvs.extra-buff-count=2
# system property to accelerate Progressive Download using STA persist.mm.sta.enable=0
#property to enable fingerprint persist.qfp=false
#min/max cpu in core control ro.vendor.qti.core_ctl_min_cpu=2 ro.vendor.qti.core_ctl_max_cpu=4
#Enable B service adj transition by default ro.vendor.qti.sys.fw.bservice_enable=true ro.vendor.qti.sys.fw.bservice_limit=5 ro.vendor.qti.sys.fw.bservice_age=5000
# Enable Delay Service Restart ro.vendor.qti.am.reschedule_service=true
# set cutoff voltage to 3400mV ro.cutoff_voltage_mv=3400
#set device emmc size ro.emmc_size=16GB
#force HAL1 for below packages vendor.camera.hal1.packagelist=com.skype.raider,com.google.android.talk
#Enable FR27607-RIL to send ONLINE cmd in bootup #persist.radio.poweron_opt=1
#low power mode for camera vendor.camera.lowpower.record.enable=1
#properties for limiting preview size in camera persist.vendor.camera.display.umax=1920x1080 persist.vendor.camera.display.lmax=1280x720
#expose aux camera for below packages vendor.camera.aux.packagelist=org.codeaurora.snapcam
#set cutoff voltage to 3400mV ro.cutoff_voltage_mv=3400
# ro.location properties below are used in conjunction # with NLP_MODE setting in /vendor/etc/izat.conf # either as the main network provider or as a fallback # provider depending on NLP_MODE that is set # These properties are optional and will not cause # issues if not set to existing packages. # ro.location.osnlp.package sets the name of default # OS sepecific network location provider package to use # ro.location.osnlp.region.package is set to the name # of the alternative network location provider package # to be used for a particular region where the default # network location provider is not functional ro.location.osnlp.package=com.google.android.gms ro.location.osnlp.region.package=
VERSION INFO FOUND UNDER ABOUT PHONE SCREEN: System Version: 29.251.156.channel.retail.en.US Model Number: moto g(7) play Android Version: 9 Baseband Version: M632_26.100.01.120.01R Build Id: PPY29.105-134 SW Display Build ID: PPY29.105-134 Build Date: Tue Jul 2 03:42:05 CDT 2019
OTHER MISC VERSION INFO: Subsidy Lock Config: slcf_rev_d_default_v1.0.nvm Regulatory Info (eLabel): regulatory_info_default.png Blur Version: Blur_Version.29.251.156.channel.retail.en.US Version when read from CPV: channel-user 9 PPY29.105-134 e13ed release-keys
AB Update Enabled: True Full Treble Enabled: True
Command:
fastboot getvar max-sparse-size fastboot oem fb_mode_set fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash modem NON-HLOS.bin fastboot flash fsg fsg.mbn fastbooterase modemst1 fastbooterase modemst2 fastboot flash dsp adspso.bin fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system system.img_sparsechunk.5 fastboot flash system system.img_sparsechunk.6 fastboot flash system system.img_sparsechunk.7 fastboot flash system_b system_b.img_sparsechunk.0 fastboot flash system_b system_b.img_sparsechunk.1 fastboot flash vendor vendor.img fastboot flash oem oem.img fastboot flash oem_b oem_other.img fastbooterase userdata fastbooterase DDR fastboot oem fb_mode_clear echo ----------------------------------------------------------------------------------------------- echo English - Process concluded! echo Português - Processo concluído! echo English - Press any key to restart the phone! echo Português - Pressione qualquer tecla para reiniciar o celular! echo ----------------------------------------------------------------------------------------------- pause fastboot reboot exit
Comentário
Aguarde, carregando...