Faça download do firmware do Motorola para
dispositivo Moto G7 Plus XT1965-2 com o firmware Motorola é possível fazer upgrade
ou
downgrade do sistema do
seu Moto G7 Plus XT1965-2 e também
é possível recuperar seus dispositivos de loop infinito entre outros problemas
relacionado a software.
Primeiro de tudo, uma coisa importante - antes de começar a fazer qualquer coisa
com o seu telefone, faça o backup dos seus dados pessoais. É apenas para sua
segurança, caso algo dê errado ou ocorra algum erro. Nesse caso, você pode usar
o backup para restaurar os dados e tentar fazer tudo novamente.
O Google nos notificou que dia 16/12/2023 a conta Google Workspace do KF Host vai ser cancelada, caso alguém queira fazer uma cópia do nosso acervo de firmware entre em até dia 13/12/2023, veja aviso completo
Atenção
Nós do KF Host não nos responsabilizamos por quaisquer danos causados nos
dispositivos.
A responsabilidade é inteiramente do usuário.
Lista do
firmware disponível para esse
modelo Moto G7 Plus XT1965-2
Atenção se você receber a mensagem abaixo ao tentar fazer download pelo Google Drive, acesse nosso vídeo ensinando passo a passo como solucionar
Assistir
XT1965-2 LAKE RETBR 10 QPWS30.61-21-9 subsidy-DEFAULT
#Property to enable display default color mode vendor.display.enable_default_color_mode=1
#Property to enable color management in sf ro.surface_flinger.use_color_management=true
# Display Properties as per treble compliance vendor.gralloc.enable_fb_ubwc=1 vendor.display.disable_skip_validate=1
#ro.hdmi.enable=true # # system props for the cne module # persist.vendor.cne.feature=1
#system props for the MM modules media.stagefright.enable-player=true media.stagefright.enable-http=true media.stagefright.enable-aac=true media.stagefright.enable-qcp=true media.stagefright.enable-scan=true mmp.enable.3g2=true media.aac_51_output_enabled=true mm.enable.smoothstreaming=true media.settings.xml=/vendor/etc/media_profiles_vendor.xml #codecs:(PARSER_)AAC AC3 AMR_NB AMR_WB ASF AVI DTS FLV 3GP 3G2 MKV MP2PS MP2TS MP3 OGG QCP WAV FLAC AIFF APE DSD vendor.mm.enable.qcom_parser=13631487 persist.mm.enable.prefetch=true
#prefer HW codec over SW for thumbnail media.stagefright.thumbnail.prefer_hw_codecs=true
#parser input buffer size(256kb) in byte stream mode audio.parser.ip.buffer.size=262144
#property to enable narrow search range for video encoding vidc.enc.target_support_bframe=1 vendor.vidc.enc.disable_bframes=1 vendor.vidc.dec.enable.downscalar=1
# enable PQ feature by default vendor.vidc.enc.disable.pq=false
# Additional buffers shared between Camera and Video vidc.enc.dcvs.extra-buff-count=2
# # system props for the data modules # ro.vendor.use_data_netmgrd=true persist.vendor.data.mode=concurrent #system props for time-services persist.timed.enable=true
# system property for maximum number of HFP client connections #bt.max.hfpclient.connections=1
# System property for cabl ro.qualcomm.cabl=0 ro.vendor.display.cabl=0
# # System props for telephony # System prop to turn on CdmaLTEPhone always telephony.lteOnCdmaDevice=1
#system prop for wipower support #ro.bluetooth.emb_wp_mode=true #ro.bluetooth.wipower=true
# #snapdragon value add features # ro.qc.sdk.audio.ssr=false ##fluencetype can be "fluence" or "fluencepro" or "none" ro.qc.sdk.audio.fluencetype=none persist.audio.fluence.voicecall=true persist.audio.fluence.voicerec=false persist.audio.fluence.speaker=true #Set for SDM660 tunnel.audio.encode = false #Buffer size in kbytes for compress offload playback audio.offload.buffer.size.kb=64 #Minimum duration for offload playback in secs audio.offload.min.duration.secs=30 #Enable offload audio video playback by default audio.offload.video=true
#Enable PCM offload by default audio.offload.pcm.16bit.enable=true audio.offload.pcm.24bit.enable=true
#Enable audio track offload by default audio.offload.track.enable=true
#Enable music through deep buffer audio.deep_buffer.media=true
#enable downsampling for multi-channel content > 48Khz audio.playback.mch.downsample=true
#disable voice path for PCM VoIP by default use.voice.path.for.pcm.voip=false ro.config.vc_call_vol_steps=8
#enable software decoders for ALAC and APE. use.qti.sw.alac.decoder=true use.qti.sw.ape.decoder=true
#System property for FM transmitter ro.fm.transmitter=false #enable dsp gapless mode by default audio.offload.gapless.enabled=true
#system prop for RmNet Data persist.data.df.dev_name=rmnet_usb0
#property to enable user to access Google WFD settings #persist.debug.wfd.enable=1 #Enable stm-events persist.debug.coresight.config=stm-events ##property to choose between virtual/external wfd display persist.sys.wfd.virtual=0
#property to enable VDS WFD solution persist.hwc.enable_vds=1
#Settings to enable sensors #Device Orientation sensor ro.vendor.sensors.dev_ori=true #Persistent Motion Detector # PRODUCT_PROPERTY_OVERRIDES only append the same property again in the # resulting build.prop file, and the first line found for a particular propery # name still takes precidence at runtime. #ro.vendor.sensors.pmd=true #Stationary Detector ro.vendor.sensors.sta_detect=true #Motion Detector ro.vendor.sensors.mot_detect=true
# Motorola: This property no longer supported #config.disable_consumerir=true
#Expose aux camera for below packages vendor.camera.aux.packagelist=org.codeaurora.snapcam
persist.vendor.camera.validate.aux=1
#Whitelisting the below packages persist.vendor.camera.privapp.list=org.codeaurora.snapcam persist.camera.privapp.list=org.codeaurora.snapcam
#disable UBWC for camera persist.vendor.camera.preview.ubwc=0
#set maximum supported adapter voltage persist.chg.max_volt_mv=9000
#system prop for Bluetooth SOC type vendor.bluetooth.soc=cherokee ro.bluetooth.library_name=libbluetooth_qti.so persist.vendor.btstack.enable.splita2dp=false persist.vendor.btstack.a2dp_offload_cap=sbc-aptx-aptxhd-aac
# enable IZat OptInApp overlay persist.vendor.overlay.izat.optin=rro # end of device/qcom/sdm660_64/system.prop
VERSION INFO FOUND UNDER ABOUT PHONE SCREEN: System Version: 30.201.12.lake.retail.en.US Model Number: moto g(7) plus Android Version: 10 Build Id: QPWS30.61-21-9 SW Display Build ID: QPWS30.61-21-9 Build Date: Fri Apr 10 05:59:26 CDT 2020
OTHER MISC VERSION INFO: Subsidy Lock Config: slcf_rev_d_default_v1.0.nvm Regulatory Info (eLabel): regulatory_info_default.png Blur Version: Blur_Version.30.201.12.lake.retail.en.US Version when read from CPV: lake-user 10 QPWS30.61-21-9 664a release-keys
AB Update Enabled: True Full Treble Enabled: True
Command:
fastboot getvar max-sparse-size fastboot oem fb_mode_set fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash modem NON-HLOS.bin fastboot flash fsg fsg.mbn fastbooterase modemst1 fastbooterase modemst2 fastboot flash bluetooth BTFM.bin fastboot flash dsp dspso.bin fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system system.img_sparsechunk.5 fastboot flash system_b system_other.img fastboot flash vendor vendor.img_sparsechunk.0 fastboot flash vendor vendor.img_sparsechunk.1 fastboot flash oem oem.img fastboot flash oem_b oem_other.img fastbooterase carrier fastbooterase userdata fastbooterase ddr fastboot oem fb_mode_clear echo ----------------------------------------------------------------------------------------------- echo English - Process concluded! echo Português - Processo concluído! echo English - Press any key to restart the phone! echo Português - Pressione qualquer tecla para reiniciar o celular! echo ----------------------------------------------------------------------------------------------- pause fastboot reboot exit
#Property to enable display default color mode vendor.display.enable_default_color_mode=1
#Property to enable color management in sf ro.surface_flinger.use_color_management=true
# Display Properties as per treble compliance vendor.gralloc.enable_fb_ubwc=1 vendor.display.disable_skip_validate=1
#ro.hdmi.enable=true # # system props for the cne module # persist.vendor.cne.feature=1
#system props for the MM modules media.stagefright.enable-player=true media.stagefright.enable-http=true media.stagefright.enable-aac=true media.stagefright.enable-qcp=true media.stagefright.enable-scan=true mmp.enable.3g2=true media.aac_51_output_enabled=true mm.enable.smoothstreaming=true media.settings.xml=/vendor/etc/media_profiles_vendor.xml #codecs:(PARSER_)AAC AC3 AMR_NB AMR_WB ASF AVI DTS FLV 3GP 3G2 MKV MP2PS MP2TS MP3 OGG QCP WAV FLAC AIFF APE DSD vendor.mm.enable.qcom_parser=13631487 persist.mm.enable.prefetch=true
#prefer HW codec over SW for thumbnail media.stagefright.thumbnail.prefer_hw_codecs=true
#parser input buffer size(256kb) in byte stream mode audio.parser.ip.buffer.size=262144
#property to enable narrow search range for video encoding vidc.enc.target_support_bframe=1 vendor.vidc.enc.disable_bframes=1 vendor.vidc.dec.enable.downscalar=1
# enable PQ feature by default vendor.vidc.enc.disable.pq=false
# Additional buffers shared between Camera and Video vidc.enc.dcvs.extra-buff-count=2
# # system props for the data modules # ro.vendor.use_data_netmgrd=true persist.vendor.data.mode=concurrent #system props for time-services persist.timed.enable=true
# system property for maximum number of HFP client connections #bt.max.hfpclient.connections=1
# System property for cabl ro.qualcomm.cabl=0 ro.vendor.display.cabl=0
# # System props for telephony # System prop to turn on CdmaLTEPhone always telephony.lteOnCdmaDevice=1
#system prop for wipower support #ro.bluetooth.emb_wp_mode=true #ro.bluetooth.wipower=true
# #snapdragon value add features # ro.qc.sdk.audio.ssr=false ##fluencetype can be "fluence" or "fluencepro" or "none" ro.qc.sdk.audio.fluencetype=none persist.audio.fluence.voicecall=true persist.audio.fluence.voicerec=false persist.audio.fluence.speaker=true #Set for SDM660 tunnel.audio.encode = false #Buffer size in kbytes for compress offload playback audio.offload.buffer.size.kb=64 #Minimum duration for offload playback in secs audio.offload.min.duration.secs=30 #Enable offload audio video playback by default audio.offload.video=true
#Enable PCM offload by default audio.offload.pcm.16bit.enable=true audio.offload.pcm.24bit.enable=true
#Enable audio track offload by default audio.offload.track.enable=true
#Enable music through deep buffer audio.deep_buffer.media=true
#enable downsampling for multi-channel content > 48Khz audio.playback.mch.downsample=true
#disable voice path for PCM VoIP by default use.voice.path.for.pcm.voip=false ro.config.vc_call_vol_steps=8
#enable software decoders for ALAC and APE. use.qti.sw.alac.decoder=true use.qti.sw.ape.decoder=true
#System property for FM transmitter ro.fm.transmitter=false #enable dsp gapless mode by default audio.offload.gapless.enabled=true
#system prop for RmNet Data persist.data.df.dev_name=rmnet_usb0
#property to enable user to access Google WFD settings #persist.debug.wfd.enable=1 #Enable stm-events persist.debug.coresight.config=stm-events ##property to choose between virtual/external wfd display persist.sys.wfd.virtual=0
#property to enable VDS WFD solution persist.hwc.enable_vds=1
#Settings to enable sensors #Device Orientation sensor ro.vendor.sensors.dev_ori=true #Persistent Motion Detector # PRODUCT_PROPERTY_OVERRIDES only append the same property again in the # resulting build.prop file, and the first line found for a particular propery # name still takes precidence at runtime. #ro.vendor.sensors.pmd=true #Stationary Detector ro.vendor.sensors.sta_detect=true #Motion Detector ro.vendor.sensors.mot_detect=true
# Motorola: This property no longer supported #config.disable_consumerir=true
#Expose aux camera for below packages vendor.camera.aux.packagelist=org.codeaurora.snapcam
persist.vendor.camera.validate.aux=1
#Whitelisting the below packages persist.vendor.camera.privapp.list=org.codeaurora.snapcam persist.camera.privapp.list=org.codeaurora.snapcam
#disable UBWC for camera persist.vendor.camera.preview.ubwc=0
#set maximum supported adapter voltage persist.chg.max_volt_mv=9000
#system prop for Bluetooth SOC type vendor.bluetooth.soc=cherokee ro.bluetooth.library_name=libbluetooth_qti.so persist.vendor.btstack.enable.splita2dp=false persist.vendor.btstack.a2dp_offload_cap=sbc-aptx-aptxhd-aac
# enable IZat OptInApp overlay persist.vendor.overlay.izat.optin=rro # end of device/qcom/sdm660_64/system.prop
VERSION INFO FOUND UNDER ABOUT PHONE SCREEN: System Version: 30.201.6.lake.retail.en.US Model Number: moto g(7) plus Android Version: 10 Baseband Version: M636_13.45.02.60R Build Id: QPWS30.61-21-3 SW Display Build ID: QPWS30.61-21-3 Build Date: Fri Feb 14 00:59:16 CST 2020
OTHER MISC VERSION INFO: Subsidy Lock Config: slcf_rev_d_default_v1.0.nvm Regulatory Info (eLabel): regulatory_info_default.png Blur Version: Blur_Version.30.201.6.lake.retail.en.US Version when read from CPV: lake-user 10 QPWS30.61-21-3 0f1d7 release-keys
AB Update Enabled: True Full Treble Enabled: True
Command:
fastboot getvar max-sparse-size fastboot oem fb_mode_set fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash modem NON-HLOS.bin fastboot flash fsg fsg.mbn fastbooterase modemst1 fastbooterase modemst2 fastboot flash bluetooth BTFM.bin fastboot flash dsp dspso.bin fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system system.img_sparsechunk.5 fastboot flash system_b system_other.img fastboot flash vendor vendor.img_sparsechunk.0 fastboot flash vendor vendor.img_sparsechunk.1 fastboot flash oem oem.img fastboot flash oem_b oem_other.img fastbooterase carrier fastbooterase userdata fastbooterase ddr fastboot oem fb_mode_clear echo ----------------------------------------------------------------------------------------------- echo English - Process concluded! echo Português - Processo concluído! echo English - Press any key to restart the phone! echo Português - Pressione qualquer tecla para reiniciar o celular! echo ----------------------------------------------------------------------------------------------- pause fastboot reboot exit
VERSION INFO FOUND UNDER ABOUT PHONE SCREEN: System Version: 30.201.5.lake.retail.en.US Model Number: moto g(7) plus Android Version: 10 Build Id: QPWS30.61-21-18-5 SW Display Build ID: QPWS30.61-21-18-5 Build Date: Fri Nov 20 23:32:30 CST 2020
OTHER MISC VERSION INFO: Subsidy Lock Config: slcf_rev_d_default_v1.0.nvm Regulatory Info (eLabel): regulatory_info_default.png eLabel SHA1: da39a3ee5e6b4b0d3255bfef95601890afd80709 Blur Version: Blur_Version.30.201.5.lake.retail.en.US Version when read from CPV: lake-user 10 QPWS30.61-21-18-5 2b2c5 release-keys
AB Update Enabled: True Full Treble Enabled: True
Command:
fastboot getvar max-sparse-size fastboot oem fb_mode_set fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash modem NON-HLOS.bin fastboot flash fsg fsg.mbn fastbooterase modemst1 fastbooterase modemst2 fastboot flash bluetooth BTFM.bin fastboot flash dsp dspso.bin fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system system.img_sparsechunk.5 fastboot flash system_b system_other.img fastboot flash vendor vendor.img_sparsechunk.0 fastboot flash vendor vendor.img_sparsechunk.1 fastboot flash oem oem.img fastboot flash oem_b oem_other.img fastbooterase carrier fastbooterase userdata fastbooterase ddr fastboot oem fb_mode_clear echo ----------------------------------------------------------------------------------------------- echo English - Process concluded! echo Português - Processo concluído! echo English - Press any key to restart the phone! echo Português - Pressione qualquer tecla para reiniciar o celular! echo ----------------------------------------------------------------------------------------------- pause fastboot reboot exit
VERSION INFO FOUND UNDER ABOUT PHONE SCREEN: System Version: 30.201.3.lake.retail.en.US Model Number: moto g(7) plus Android Version: 10 Build Id: QPWS30.61-21-18-3 SW Display Build ID: QPWS30.61-21-18-3 Build Date: Thu Oct 1 02:56:52 CDT 2020
OTHER MISC VERSION INFO: Subsidy Lock Config: slcf_rev_d_default_v1.0.nvm Regulatory Info (eLabel): regulatory_info_default.png Blur Version: Blur_Version.30.201.3.lake.retail.en.US Version when read from CPV: lake-user 10 QPWS30.61-21-18-3 323d8 release-keys
AB Update Enabled: True Full Treble Enabled: True
Command:
fastboot getvar max-sparse-size fastboot oem fb_mode_set fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash modem NON-HLOS.bin fastboot flash fsg fsg.mbn fastbooterase modemst1 fastbooterase modemst2 fastboot flash bluetooth BTFM.bin fastboot flash dsp dspso.bin fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system system.img_sparsechunk.5 fastboot flash system_b system_other.img fastboot flash vendor vendor.img_sparsechunk.0 fastboot flash vendor vendor.img_sparsechunk.1 fastboot flash oem oem.img fastboot flash oem_b oem_other.img fastbooterase carrier fastbooterase userdata fastbooterase ddr fastboot oem fb_mode_clear echo ----------------------------------------------------------------------------------------------- echo English - Process concluded! echo Português - Processo concluído! echo English - Press any key to restart the phone! echo Português - Pressione qualquer tecla para reiniciar o celular! echo ----------------------------------------------------------------------------------------------- pause fastboot reboot exit
#Property to enable display default color mode vendor.display.enable_default_color_mode=1
#Property to enable color management in sf ro.surface_flinger.use_color_management=true
# Display Properties as per treble compliance vendor.gralloc.enable_fb_ubwc=1 vendor.display.disable_skip_validate=1
#ro.hdmi.enable=true # # system props for the cne module # persist.vendor.cne.feature=1
#system props for the MM modules media.stagefright.enable-player=true media.stagefright.enable-http=true media.stagefright.enable-aac=true media.stagefright.enable-qcp=true media.stagefright.enable-scan=true mmp.enable.3g2=true media.aac_51_output_enabled=true mm.enable.smoothstreaming=true media.settings.xml=/vendor/etc/media_profiles_vendor.xml #codecs:(PARSER_)AAC AC3 AMR_NB AMR_WB ASF AVI DTS FLV 3GP 3G2 MKV MP2PS MP2TS MP3 OGG QCP WAV FLAC AIFF APE DSD vendor.mm.enable.qcom_parser=13631487 persist.mm.enable.prefetch=true
#prefer HW codec over SW for thumbnail media.stagefright.thumbnail.prefer_hw_codecs=true
#parser input buffer size(256kb) in byte stream mode audio.parser.ip.buffer.size=262144
#property to enable narrow search range for video encoding vidc.enc.target_support_bframe=1 vendor.vidc.enc.disable_bframes=1 vendor.vidc.dec.enable.downscalar=1
# enable PQ feature by default vendor.vidc.enc.disable.pq=false
# Additional buffers shared between Camera and Video vidc.enc.dcvs.extra-buff-count=2
# # system props for the data modules # ro.vendor.use_data_netmgrd=true persist.vendor.data.mode=concurrent #system props for time-services persist.timed.enable=true
# system property for maximum number of HFP client connections #bt.max.hfpclient.connections=1
# System property for cabl ro.qualcomm.cabl=0 ro.vendor.display.cabl=0
# # System props for telephony # System prop to turn on CdmaLTEPhone always telephony.lteOnCdmaDevice=1
#system prop for wipower support #ro.bluetooth.emb_wp_mode=true #ro.bluetooth.wipower=true
# #snapdragon value add features # ro.qc.sdk.audio.ssr=false ##fluencetype can be "fluence" or "fluencepro" or "none" ro.qc.sdk.audio.fluencetype=none persist.audio.fluence.voicecall=true persist.audio.fluence.voicerec=false persist.audio.fluence.speaker=true #Set for SDM660 tunnel.audio.encode = false #Buffer size in kbytes for compress offload playback audio.offload.buffer.size.kb=64 #Minimum duration for offload playback in secs audio.offload.min.duration.secs=30 #Enable offload audio video playback by default audio.offload.video=true
#Enable PCM offload by default audio.offload.pcm.16bit.enable=true audio.offload.pcm.24bit.enable=true
#Enable audio track offload by default audio.offload.track.enable=true
#Enable music through deep buffer audio.deep_buffer.media=true
#enable downsampling for multi-channel content > 48Khz audio.playback.mch.downsample=true
#disable voice path for PCM VoIP by default use.voice.path.for.pcm.voip=false ro.config.vc_call_vol_steps=8
#enable software decoders for ALAC and APE. use.qti.sw.alac.decoder=true use.qti.sw.ape.decoder=true
#System property for FM transmitter ro.fm.transmitter=false #enable dsp gapless mode by default audio.offload.gapless.enabled=true
#system prop for RmNet Data persist.data.df.dev_name=rmnet_usb0
#property to enable user to access Google WFD settings #persist.debug.wfd.enable=1 #Enable stm-events persist.debug.coresight.config=stm-events ##property to choose between virtual/external wfd display persist.sys.wfd.virtual=0
#property to enable VDS WFD solution persist.hwc.enable_vds=1
#Settings to enable sensors #Device Orientation sensor ro.vendor.sensors.dev_ori=true #Persistent Motion Detector # PRODUCT_PROPERTY_OVERRIDES only append the same property again in the # resulting build.prop file, and the first line found for a particular propery # name still takes precidence at runtime. #ro.vendor.sensors.pmd=true #Stationary Detector ro.vendor.sensors.sta_detect=true #Motion Detector ro.vendor.sensors.mot_detect=true
# Motorola: This property no longer supported #config.disable_consumerir=true
#Expose aux camera for below packages vendor.camera.aux.packagelist=org.codeaurora.snapcam
persist.vendor.camera.validate.aux=1
#Whitelisting the below packages persist.vendor.camera.privapp.list=org.codeaurora.snapcam persist.camera.privapp.list=org.codeaurora.snapcam
#disable UBWC for camera persist.vendor.camera.preview.ubwc=0
#set maximum supported adapter voltage persist.chg.max_volt_mv=9000
#system prop for Bluetooth SOC type vendor.bluetooth.soc=cherokee ro.bluetooth.library_name=libbluetooth_qti.so persist.vendor.btstack.enable.splita2dp=false persist.vendor.btstack.a2dp_offload_cap=sbc-aptx-aptxhd-aac
# enable IZat OptInApp overlay persist.vendor.overlay.izat.optin=rro # end of device/qcom/sdm660_64/system.prop
VERSION INFO FOUND UNDER ABOUT PHONE SCREEN: System Version: 30.201.22.lake.retail.en.US Model Number: moto g(7) plus Android Version: 10 Build Id: QPWS30.61-21-14 SW Display Build ID: QPWS30.61-21-14 Build Date: Tue Jul 28 06:56:18 CDT 2020
OTHER MISC VERSION INFO: Subsidy Lock Config: slcf_rev_d_default_v1.0.nvm Regulatory Info (eLabel): regulatory_info_default.png Blur Version: Blur_Version.30.201.22.lake.retail.en.US Version when read from CPV: lake-user 10 QPWS30.61-21-14 a5a6c release-keys
AB Update Enabled: True Full Treble Enabled: True
Command:
fastboot getvar max-sparse-size fastboot oem fb_mode_set fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash modem NON-HLOS.bin fastboot flash fsg fsg.mbn fastbooterase modemst1 fastbooterase modemst2 fastboot flash bluetooth BTFM.bin fastboot flash dsp dspso.bin fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system system.img_sparsechunk.5 fastboot flash system_b system_other.img fastboot flash vendor vendor.img_sparsechunk.0 fastboot flash vendor vendor.img_sparsechunk.1 fastboot flash oem oem.img fastboot flash oem_b oem_other.img fastbooterase carrier fastbooterase userdata fastbooterase ddr fastboot oem fb_mode_clear echo ----------------------------------------------------------------------------------------------- echo English - Process concluded! echo Português - Processo concluído! echo English - Press any key to restart the phone! echo Português - Pressione qualquer tecla para reiniciar o celular! echo ----------------------------------------------------------------------------------------------- pause fastboot reboot exit
#Property to enable display default color mode vendor.display.enable_default_color_mode=1
#Property to enable color management in sf ro.surface_flinger.use_color_management=true
# Display Properties as per treble compliance vendor.gralloc.enable_fb_ubwc=1 vendor.display.disable_skip_validate=1
#ro.hdmi.enable=true # # system props for the cne module # persist.vendor.cne.feature=1
#system props for the MM modules media.stagefright.enable-player=true media.stagefright.enable-http=true media.stagefright.enable-aac=true media.stagefright.enable-qcp=true media.stagefright.enable-scan=true mmp.enable.3g2=true media.aac_51_output_enabled=true mm.enable.smoothstreaming=true media.settings.xml=/vendor/etc/media_profiles_vendor.xml #codecs:(PARSER_)AAC AC3 AMR_NB AMR_WB ASF AVI DTS FLV 3GP 3G2 MKV MP2PS MP2TS MP3 OGG QCP WAV FLAC AIFF APE DSD vendor.mm.enable.qcom_parser=13631487 persist.mm.enable.prefetch=true
#prefer HW codec over SW for thumbnail media.stagefright.thumbnail.prefer_hw_codecs=true
#parser input buffer size(256kb) in byte stream mode audio.parser.ip.buffer.size=262144
#property to enable narrow search range for video encoding vidc.enc.target_support_bframe=1 vendor.vidc.enc.disable_bframes=1 vendor.vidc.dec.enable.downscalar=1
# enable PQ feature by default vendor.vidc.enc.disable.pq=false
# Additional buffers shared between Camera and Video vidc.enc.dcvs.extra-buff-count=2
# # system props for the data modules # ro.vendor.use_data_netmgrd=true persist.vendor.data.mode=concurrent #system props for time-services persist.timed.enable=true
# system property for maximum number of HFP client connections #bt.max.hfpclient.connections=1
# System property for cabl ro.qualcomm.cabl=0 ro.vendor.display.cabl=0
# # System props for telephony # System prop to turn on CdmaLTEPhone always telephony.lteOnCdmaDevice=1
#system prop for wipower support #ro.bluetooth.emb_wp_mode=true #ro.bluetooth.wipower=true
# #snapdragon value add features # ro.qc.sdk.audio.ssr=false ##fluencetype can be "fluence" or "fluencepro" or "none" ro.qc.sdk.audio.fluencetype=none persist.audio.fluence.voicecall=true persist.audio.fluence.voicerec=false persist.audio.fluence.speaker=true #Set for SDM660 tunnel.audio.encode = false #Buffer size in kbytes for compress offload playback audio.offload.buffer.size.kb=64 #Minimum duration for offload playback in secs audio.offload.min.duration.secs=30 #Enable offload audio video playback by default audio.offload.video=true
#Enable PCM offload by default audio.offload.pcm.16bit.enable=true audio.offload.pcm.24bit.enable=true
#Enable audio track offload by default audio.offload.track.enable=true
#Enable music through deep buffer audio.deep_buffer.media=true
#enable downsampling for multi-channel content > 48Khz audio.playback.mch.downsample=true
#disable voice path for PCM VoIP by default use.voice.path.for.pcm.voip=false ro.config.vc_call_vol_steps=8
#enable software decoders for ALAC and APE. use.qti.sw.alac.decoder=true use.qti.sw.ape.decoder=true
#System property for FM transmitter ro.fm.transmitter=false #enable dsp gapless mode by default audio.offload.gapless.enabled=true
#system prop for RmNet Data persist.data.df.dev_name=rmnet_usb0
#property to enable user to access Google WFD settings #persist.debug.wfd.enable=1 #Enable stm-events persist.debug.coresight.config=stm-events ##property to choose between virtual/external wfd display persist.sys.wfd.virtual=0
#property to enable VDS WFD solution persist.hwc.enable_vds=1
#Settings to enable sensors #Device Orientation sensor ro.vendor.sensors.dev_ori=true #Persistent Motion Detector # PRODUCT_PROPERTY_OVERRIDES only append the same property again in the # resulting build.prop file, and the first line found for a particular propery # name still takes precidence at runtime. #ro.vendor.sensors.pmd=true #Stationary Detector ro.vendor.sensors.sta_detect=true #Motion Detector ro.vendor.sensors.mot_detect=true
# Motorola: This property no longer supported #config.disable_consumerir=true
#Expose aux camera for below packages vendor.camera.aux.packagelist=org.codeaurora.snapcam
persist.vendor.camera.validate.aux=1
#Whitelisting the below packages persist.vendor.camera.privapp.list=org.codeaurora.snapcam persist.camera.privapp.list=org.codeaurora.snapcam
#disable UBWC for camera persist.vendor.camera.preview.ubwc=0
#set maximum supported adapter voltage persist.chg.max_volt_mv=9000
#system prop for Bluetooth SOC type vendor.bluetooth.soc=cherokee ro.bluetooth.library_name=libbluetooth_qti.so persist.vendor.btstack.enable.splita2dp=false persist.vendor.btstack.a2dp_offload_cap=sbc-aptx-aptxhd-aac
# enable IZat OptInApp overlay persist.vendor.overlay.izat.optin=rro # end of device/qcom/sdm660_64/system.prop
VERSION INFO FOUND UNDER ABOUT PHONE SCREEN: System Version: 30.201.14.lake.retail.en.US Model Number: moto g(7) plus Android Version: 10 Build Id: QPWS30.61-21-11 SW Display Build ID: QPWS30.61-21-11 Build Date: Sun May 24 10:52:57 CDT 2020
OTHER MISC VERSION INFO: Subsidy Lock Config: slcf_rev_d_default_v1.0.nvm Regulatory Info (eLabel): regulatory_info_default.png Blur Version: Blur_Version.30.201.14.lake.retail.en.US Version when read from CPV: lake-user 10 QPWS30.61-21-11 e25a6 release-keys
AB Update Enabled: True Full Treble Enabled: True
Command:
fastboot getvar max-sparse-size fastboot oem fb_mode_set fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash modem NON-HLOS.bin fastboot flash fsg fsg.mbn fastbooterase modemst1 fastbooterase modemst2 fastboot flash bluetooth BTFM.bin fastboot flash dsp dspso.bin fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system system.img_sparsechunk.5 fastboot flash system_b system_other.img fastboot flash vendor vendor.img_sparsechunk.0 fastboot flash vendor vendor.img_sparsechunk.1 fastboot flash oem oem.img fastboot flash oem_b oem_other.img fastbooterase carrier fastbooterase userdata fastbooterase ddr fastboot oem fb_mode_clear echo ----------------------------------------------------------------------------------------------- echo English - Process concluded! echo Português - Processo concluído! echo English - Press any key to restart the phone! echo Português - Pressione qualquer tecla para reiniciar o celular! echo ----------------------------------------------------------------------------------------------- pause fastboot reboot exit
#Property to enable display default color mode vendor.display.enable_default_color_mode=1
#Property to enable color management in sf ro.surface_flinger.use_color_management=true
# Display Properties as per treble compliance vendor.gralloc.enable_fb_ubwc=1 vendor.display.disable_skip_validate=1
#ro.hdmi.enable=true # # system props for the cne module # persist.vendor.cne.feature=1
#system props for the MM modules media.stagefright.enable-player=true media.stagefright.enable-http=true media.stagefright.enable-aac=true media.stagefright.enable-qcp=true media.stagefright.enable-scan=true mmp.enable.3g2=true media.aac_51_output_enabled=true mm.enable.smoothstreaming=true media.settings.xml=/vendor/etc/media_profiles_vendor.xml #codecs:(PARSER_)AAC AC3 AMR_NB AMR_WB ASF AVI DTS FLV 3GP 3G2 MKV MP2PS MP2TS MP3 OGG QCP WAV FLAC AIFF APE DSD vendor.mm.enable.qcom_parser=13631487 persist.mm.enable.prefetch=true
#prefer HW codec over SW for thumbnail media.stagefright.thumbnail.prefer_hw_codecs=true
#parser input buffer size(256kb) in byte stream mode audio.parser.ip.buffer.size=262144
#property to enable narrow search range for video encoding vidc.enc.target_support_bframe=1 vendor.vidc.enc.disable_bframes=1 vendor.vidc.dec.enable.downscalar=1
# enable PQ feature by default vendor.vidc.enc.disable.pq=false
# Additional buffers shared between Camera and Video vidc.enc.dcvs.extra-buff-count=2
# # system props for the data modules # ro.vendor.use_data_netmgrd=true persist.vendor.data.mode=concurrent #system props for time-services persist.timed.enable=true
# system property for maximum number of HFP client connections #bt.max.hfpclient.connections=1
# System property for cabl ro.qualcomm.cabl=0 ro.vendor.display.cabl=0
# # System props for telephony # System prop to turn on CdmaLTEPhone always telephony.lteOnCdmaDevice=1
#system prop for wipower support #ro.bluetooth.emb_wp_mode=true #ro.bluetooth.wipower=true
# #snapdragon value add features # ro.qc.sdk.audio.ssr=false ##fluencetype can be "fluence" or "fluencepro" or "none" ro.qc.sdk.audio.fluencetype=none persist.audio.fluence.voicecall=true persist.audio.fluence.voicerec=false persist.audio.fluence.speaker=true #Set for SDM660 tunnel.audio.encode = false #Buffer size in kbytes for compress offload playback audio.offload.buffer.size.kb=64 #Minimum duration for offload playback in secs audio.offload.min.duration.secs=30 #Enable offload audio video playback by default audio.offload.video=true
#Enable PCM offload by default audio.offload.pcm.16bit.enable=true audio.offload.pcm.24bit.enable=true
#Enable audio track offload by default audio.offload.track.enable=true
#Enable music through deep buffer audio.deep_buffer.media=true
#enable downsampling for multi-channel content > 48Khz audio.playback.mch.downsample=true
#disable voice path for PCM VoIP by default use.voice.path.for.pcm.voip=false ro.config.vc_call_vol_steps=8
#enable software decoders for ALAC and APE. use.qti.sw.alac.decoder=true use.qti.sw.ape.decoder=true
#System property for FM transmitter ro.fm.transmitter=false #enable dsp gapless mode by default audio.offload.gapless.enabled=true
#system prop for RmNet Data persist.data.df.dev_name=rmnet_usb0
#property to enable user to access Google WFD settings #persist.debug.wfd.enable=1 #Enable stm-events persist.debug.coresight.config=stm-events ##property to choose between virtual/external wfd display persist.sys.wfd.virtual=0
#property to enable VDS WFD solution persist.hwc.enable_vds=1
#Settings to enable sensors #Device Orientation sensor ro.vendor.sensors.dev_ori=true #Persistent Motion Detector # PRODUCT_PROPERTY_OVERRIDES only append the same property again in the # resulting build.prop file, and the first line found for a particular propery # name still takes precidence at runtime. #ro.vendor.sensors.pmd=true #Stationary Detector ro.vendor.sensors.sta_detect=true #Motion Detector ro.vendor.sensors.mot_detect=true
# Motorola: This property no longer supported #config.disable_consumerir=true
#Expose aux camera for below packages vendor.camera.aux.packagelist=org.codeaurora.snapcam
persist.vendor.camera.validate.aux=1
#Whitelisting the below packages persist.vendor.camera.privapp.list=org.codeaurora.snapcam persist.camera.privapp.list=org.codeaurora.snapcam
#disable UBWC for camera persist.vendor.camera.preview.ubwc=0
#set maximum supported adapter voltage persist.chg.max_volt_mv=9000
#system prop for Bluetooth SOC type vendor.bluetooth.soc=cherokee ro.bluetooth.library_name=libbluetooth_qti.so persist.vendor.btstack.enable.splita2dp=false persist.vendor.btstack.a2dp_offload_cap=sbc-aptx-aptxhd-aac
# enable IZat OptInApp overlay persist.vendor.overlay.izat.optin=rro # end of device/qcom/sdm660_64/system.prop
VERSION INFO FOUND UNDER ABOUT PHONE SCREEN: System Version: 10.1.22.lake.retail.en.US Model Number: moto g(7) plus Android Version: 10 Baseband Version: M636_13.45.02.60R Build Id: QPW30.61-21 SW Display Build ID: QPW30.61-21 Build Date: Fri Dec 20 21:49:16 CST 2019
OTHER MISC VERSION INFO: Subsidy Lock Config: slcf_rev_d_default_v1.0.nvm Regulatory Info (eLabel): regulatory_info_default.png Blur Version: Blur_Version.10.1.22.lake.retail.en.US Version when read from CPV: lake-user 10 QPW30.61-21 cb81e release-keys
AB Update Enabled: True Full Treble Enabled: True
Command:
fastboot getvar max-sparse-size fastboot oem fb_mode_set fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash modem NON-HLOS.bin fastboot flash fsg fsg.mbn fastbooterase modemst1 fastbooterase modemst2 fastboot flash bluetooth BTFM.bin fastboot flash dsp dspso.bin fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system system.img_sparsechunk.5 fastboot flash system_b system_other.img fastboot flash vendor vendor.img_sparsechunk.0 fastboot flash vendor vendor.img_sparsechunk.1 fastboot flash oem oem.img fastboot flash oem_b oem_other.img fastbooterase carrier fastbooterase userdata fastbooterase ddr fastboot oem fb_mode_clear echo ----------------------------------------------------------------------------------------------- echo English - Process concluded! echo Português - Processo concluído! echo English - Press any key to restart the phone! echo Português - Pressione qualquer tecla para reiniciar o celular! echo ----------------------------------------------------------------------------------------------- pause fastboot reboot exit
VERSION INFO FOUND UNDER ABOUT PHONE SCREEN: System Version: 30.201.4.lake.retail.en.US Model Number: moto g(7) plus Android Version: 10 Build Id: QPW30.61-21-18 SW Display Build ID: QPW30.61-21-18 Build Date: Wed Aug 26 21:31:07 CDT 2020
OTHER MISC VERSION INFO: Subsidy Lock Config: slcf_rev_d_default_v1.0.nvm Regulatory Info (eLabel): regulatory_info_default.png Blur Version: Blur_Version.30.201.4.lake.retail.en.US Version when read from CPV: lake-user 10 QPW30.61-21-18 56a02 release-keys
AB Update Enabled: True Full Treble Enabled: True
Command:
fastboot getvar max-sparse-size fastboot oem fb_mode_set fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash modem NON-HLOS.bin fastboot flash fsg fsg.mbn fastbooterase modemst1 fastbooterase modemst2 fastboot flash bluetooth BTFM.bin fastboot flash dsp dspso.bin fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system system.img_sparsechunk.5 fastboot flash system_b system_other.img fastboot flash vendor vendor.img_sparsechunk.0 fastboot flash vendor vendor.img_sparsechunk.1 fastboot flash oem oem.img fastboot flash oem_b oem_other.img fastbooterase carrier fastbooterase userdata fastbooterase ddr fastboot oem fb_mode_clear echo ----------------------------------------------------------------------------------------------- echo English - Process concluded! echo Português - Processo concluído! echo English - Press any key to restart the phone! echo Português - Pressione qualquer tecla para reiniciar o celular! echo ----------------------------------------------------------------------------------------------- pause fastboot reboot exit
#Property to enable display default color mode vendor.display.enable_default_color_mode=1
# Display Properties as per treble compliance vendor.gralloc.enable_fb_ubwc=1 vendor.display.disable_skip_validate=1
#ro.hdmi.enable=true # # system props for the cne module # persist.vendor.cne.feature=1
#system props for the MM modules media.stagefright.enable-player=true media.stagefright.enable-http=true media.stagefright.enable-aac=true media.stagefright.enable-qcp=true media.stagefright.enable-scan=true mmp.enable.3g2=true media.aac_51_output_enabled=true mm.enable.smoothstreaming=true media.settings.xml=/vendor/etc/media_profiles_vendor.xml #codecs:(PARSER_)AAC AC3 AMR_NB AMR_WB ASF AVI DTS FLV 3GP 3G2 MKV MP2PS MP2TS MP3 OGG QCP WAV FLAC AIFF APE DSD vendor.mm.enable.qcom_parser=13631487 persist.mm.enable.prefetch=true
#parser input buffer size(256kb) in byte stream mode audio.parser.ip.buffer.size=262144
#property to enable narrow search range for video encoding vidc.enc.target_support_bframe=1 vendor.vidc.enc.disable_bframes=1 vendor.vidc.dec.enable.downscalar=1
# enable PQ feature by default vendor.vidc.enc.disable.pq=false
# Additional buffers shared between Camera and Video vidc.enc.dcvs.extra-buff-count=2
# # system props for the data modules # ro.vendor.use_data_netmgrd=true persist.vendor.data.mode=concurrent #system props for time-services persist.timed.enable=true
# system property for maximum number of HFP client connections #bt.max.hfpclient.connections=1
# System property for cabl ro.qualcomm.cabl=0 ro.vendor.display.cabl=0
# # System props for telephony # System prop to turn on CdmaLTEPhone always telephony.lteOnCdmaDevice=1
#system prop for wipower support #ro.bluetooth.emb_wp_mode=true #ro.bluetooth.wipower=true
# #snapdragon value add features # ro.qc.sdk.audio.ssr=false ##fluencetype can be "fluence" or "fluencepro" or "none" ro.qc.sdk.audio.fluencetype=none persist.audio.fluence.voicecall=true persist.audio.fluence.voicerec=false persist.audio.fluence.speaker=true #Set for SDM660 tunnel.audio.encode = false #Buffer size in kbytes for compress offload playback audio.offload.buffer.size.kb=64 #Minimum duration for offload playback in secs audio.offload.min.duration.secs=30 #Enable offload audio video playback by default audio.offload.video=true
#Enable PCM offload by default audio.offload.pcm.16bit.enable=true audio.offload.pcm.24bit.enable=true
#Enable audio track offload by default audio.offload.track.enable=true
#Enable music through deep buffer audio.deep_buffer.media=true
#enable downsampling for multi-channel content > 48Khz audio.playback.mch.downsample=true
#disable voice path for PCM VoIP by default use.voice.path.for.pcm.voip=false ro.config.vc_call_vol_steps=8
#enable software decoders for ALAC and APE. use.qti.sw.alac.decoder=true use.qti.sw.ape.decoder=true
#System property for FM transmitter ro.fm.transmitter=false #enable dsp gapless mode by default audio.offload.gapless.enabled=true
#system prop for RmNet Data persist.data.df.dev_name=rmnet_usb0
#property to enable user to access Google WFD settings #persist.debug.wfd.enable=1 #Enable stm-events persist.debug.coresight.config=stm-events ##property to choose between virtual/external wfd display persist.sys.wfd.virtual=0
# system prop for NFC DT ro.nfc.port=I2C
#property for vendor specific library ro.vendor.at_library=libqti-at.so
#min/max cpu in core control ro.vendor.qti.core_ctl_min_cpu=2 ro.vendor.qti.core_ctl_max_cpu=4
#property to enable DS2 dap audio.dolby.ds2.enabled=false
#Settings to enable sensors #Device Orientation sensor ro.vendor.sensors.dev_ori=true #Persistent Motion Detector # PRODUCT_PROPERTY_OVERRIDES only append the same property again in the # resulting build.prop file, and the first line found for a particular propery # name still takes precidence at runtime. #ro.vendor.sensors.pmd=true #Stationary Detector ro.vendor.sensors.sta_detect=true #Motion Detector ro.vendor.sensors.mot_detect=true
# Motorola: This property no longer supported #config.disable_consumerir=true
#Expose aux camera for below packages vendor.camera.aux.packagelist=org.codeaurora.snapcam
persist.vendor.camera.validate.aux=1
#disable UBWC for camera persist.vendor.camera.preview.ubwc=0
#set maximum supported adapter voltage persist.chg.max_volt_mv=9000
#system prop for Bluetooth SOC type vendor.bluetooth.soc=cherokee ro.bluetooth.library_name=libbluetooth_qti.so persist.vendor.btstack.enable.splita2dp=false persist.vendor.btstack.a2dp_offload_cap=sbc-aptx-aptxhd-aac
# ro.location properties below are used in conjunction # with NLP_MODE setting in /vendor/etc/izat.conf # either as the main network provider or as a fallback # provider depending on NLP_MODE that is set # These properties are optional and will not cause # issues if not set to existing packages. # ro.location.osnlp.package sets the name of default # OS sepecific network location provider package to use # ro.location.osnlp.region.package is set to the name # of the alternative network location provider package # to be used for a particular region where the default # network location provider is not functional ro.location.osnlp.package=com.google.android.gms ro.location.osnlp.region.package=
VERSION INFO FOUND UNDER ABOUT PHONE SCREEN: System Version: 29.231.3.lake.retail.en.US Model Number: moto g(7) plus Android Version: 9 Baseband Version: M636_03.08.02.35R Build Id: PPWS29.98-66-2 SW Display Build ID: PPWS29.98-66-2 Build Date: Mon Apr 1 14:29:10 CDT 2019
OTHER MISC VERSION INFO: Subsidy Lock Config: slcf_rev_d_default_v1.0.nvm Regulatory Info (eLabel): regulatory_info_default.png Blur Version: Blur_Version.29.231.3.lake.retail.en.US Version when read from CPV: lake-user 9 PPWS29.98-66-2 9d952 release-keys
AB Update Enabled: True Full Treble Enabled: True
Command:
fastboot getvar max-sparse-size fastboot oem fb_mode_set fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash modem NON-HLOS.bin fastboot flash fsg fsg.mbn fastbooterase modemst1 fastbooterase modemst2 fastboot flash bluetooth BTFM.bin fastboot flash dsp dspso.bin fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system_b system_b.img_sparsechunk.0 fastboot flash system_b system_b.img_sparsechunk.1 fastboot flash vendor vendor.img_sparsechunk.0 fastboot flash vendor vendor.img_sparsechunk.1 fastboot flash oem oem.img fastboot flash oem_b oem_other.img fastbooterase carrier fastbooterase userdata fastbooterase ddr fastboot oem fb_mode_clear echo ----------------------------------------------------------------------------------------------- echo English - Process concluded! echo Português - Processo concluído! echo English - Press any key to restart the phone! echo Português - Pressione qualquer tecla para reiniciar o celular! echo ----------------------------------------------------------------------------------------------- pause fastboot reboot exit
#Property to enable display default color mode vendor.display.enable_default_color_mode=1
# Display Properties as per treble compliance vendor.gralloc.enable_fb_ubwc=1 vendor.display.disable_skip_validate=1
#ro.hdmi.enable=true # # system props for the cne module # persist.vendor.cne.feature=1
#system props for the MM modules media.stagefright.enable-player=true media.stagefright.enable-http=true media.stagefright.enable-aac=true media.stagefright.enable-qcp=true media.stagefright.enable-scan=true mmp.enable.3g2=true media.aac_51_output_enabled=true mm.enable.smoothstreaming=true media.settings.xml=/vendor/etc/media_profiles_vendor.xml #codecs:(PARSER_)AAC AC3 AMR_NB AMR_WB ASF AVI DTS FLV 3GP 3G2 MKV MP2PS MP2TS MP3 OGG QCP WAV FLAC AIFF APE DSD vendor.mm.enable.qcom_parser=13631487 persist.mm.enable.prefetch=true
#parser input buffer size(256kb) in byte stream mode audio.parser.ip.buffer.size=262144
#property to enable narrow search range for video encoding vidc.enc.target_support_bframe=1 vendor.vidc.enc.disable_bframes=1 vendor.vidc.dec.enable.downscalar=1
# enable PQ feature by default vendor.vidc.enc.disable.pq=false
# Additional buffers shared between Camera and Video vidc.enc.dcvs.extra-buff-count=2
# # system props for the data modules # ro.vendor.use_data_netmgrd=true persist.vendor.data.mode=concurrent #system props for time-services persist.timed.enable=true
# system property for maximum number of HFP client connections #bt.max.hfpclient.connections=1
# System property for cabl ro.qualcomm.cabl=0 ro.vendor.display.cabl=0
# # System props for telephony # System prop to turn on CdmaLTEPhone always telephony.lteOnCdmaDevice=1
#system prop for wipower support #ro.bluetooth.emb_wp_mode=true #ro.bluetooth.wipower=true
# #snapdragon value add features # ro.qc.sdk.audio.ssr=false ##fluencetype can be "fluence" or "fluencepro" or "none" ro.qc.sdk.audio.fluencetype=none persist.audio.fluence.voicecall=true persist.audio.fluence.voicerec=false persist.audio.fluence.speaker=true #Set for SDM660 tunnel.audio.encode = false #Buffer size in kbytes for compress offload playback audio.offload.buffer.size.kb=64 #Minimum duration for offload playback in secs audio.offload.min.duration.secs=30 #Enable offload audio video playback by default audio.offload.video=true
#Enable PCM offload by default audio.offload.pcm.16bit.enable=true audio.offload.pcm.24bit.enable=true
#Enable audio track offload by default audio.offload.track.enable=true
#Enable music through deep buffer audio.deep_buffer.media=true
#enable downsampling for multi-channel content > 48Khz audio.playback.mch.downsample=true
#disable voice path for PCM VoIP by default use.voice.path.for.pcm.voip=false ro.config.vc_call_vol_steps=8
#enable software decoders for ALAC and APE. use.qti.sw.alac.decoder=true use.qti.sw.ape.decoder=true
#System property for FM transmitter ro.fm.transmitter=false #enable dsp gapless mode by default audio.offload.gapless.enabled=true
#system prop for RmNet Data persist.data.df.dev_name=rmnet_usb0
#property to enable user to access Google WFD settings #persist.debug.wfd.enable=1 #Enable stm-events persist.debug.coresight.config=stm-events ##property to choose between virtual/external wfd display persist.sys.wfd.virtual=0
# system prop for NFC DT ro.nfc.port=I2C
#property for vendor specific library ro.vendor.at_library=libqti-at.so
#min/max cpu in core control ro.vendor.qti.core_ctl_min_cpu=2 ro.vendor.qti.core_ctl_max_cpu=4
#property to enable DS2 dap audio.dolby.ds2.enabled=false
#Settings to enable sensors #Device Orientation sensor ro.vendor.sensors.dev_ori=true #Persistent Motion Detector # PRODUCT_PROPERTY_OVERRIDES only append the same property again in the # resulting build.prop file, and the first line found for a particular propery # name still takes precidence at runtime. #ro.vendor.sensors.pmd=true #Stationary Detector ro.vendor.sensors.sta_detect=true #Motion Detector ro.vendor.sensors.mot_detect=true
# Motorola: This property no longer supported #config.disable_consumerir=true
#Expose aux camera for below packages vendor.camera.aux.packagelist=org.codeaurora.snapcam
persist.vendor.camera.validate.aux=1
#disable UBWC for camera persist.vendor.camera.preview.ubwc=0
#set maximum supported adapter voltage persist.chg.max_volt_mv=9000
#system prop for Bluetooth SOC type vendor.bluetooth.soc=cherokee ro.bluetooth.library_name=libbluetooth_qti.so persist.vendor.btstack.enable.splita2dp=false persist.vendor.btstack.a2dp_offload_cap=sbc-aptx-aptxhd-aac
# ro.location properties below are used in conjunction # with NLP_MODE setting in /vendor/etc/izat.conf # either as the main network provider or as a fallback # provider depending on NLP_MODE that is set # These properties are optional and will not cause # issues if not set to existing packages. # ro.location.osnlp.package sets the name of default # OS sepecific network location provider package to use # ro.location.osnlp.region.package is set to the name # of the alternative network location provider package # to be used for a particular region where the default # network location provider is not functional ro.location.osnlp.package=com.google.android.gms ro.location.osnlp.region.package=
VERSION INFO FOUND UNDER ABOUT PHONE SCREEN: System Version: 29.271.13.lake.retail.en.US Model Number: moto g(7) plus Android Version: 9 Baseband Version: M636_09.25.02.49R Build Id: PPWS29.98-111-9 SW Display Build ID: PPWS29.98-111-9 Build Date: Fri Nov 29 00:16:38 CST 2019
OTHER MISC VERSION INFO: Subsidy Lock Config: slcf_rev_d_default_v1.0.nvm Regulatory Info (eLabel): regulatory_info_default.png Blur Version: Blur_Version.29.271.13.lake.retail.en.US Version when read from CPV: lake-user 9 PPWS29.98-111-9 d601 release-keys
AB Update Enabled: True Full Treble Enabled: True
Command:
fastboot getvar max-sparse-size fastboot oem fb_mode_set fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash modem NON-HLOS.bin fastboot flash fsg fsg.mbn fastbooterase modemst1 fastbooterase modemst2 fastboot flash bluetooth BTFM.bin fastboot flash dsp dspso.bin fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system_b system_b.img_sparsechunk.0 fastboot flash system_b system_b.img_sparsechunk.1 fastboot flash vendor vendor.img_sparsechunk.0 fastboot flash vendor vendor.img_sparsechunk.1 fastboot flash oem oem.img fastboot flash oem_b oem_other.img fastbooterase carrier fastbooterase userdata fastbooterase ddr fastboot oem fb_mode_clear echo ----------------------------------------------------------------------------------------------- echo English - Process concluded! echo Português - Processo concluído! echo English - Press any key to restart the phone! echo Português - Pressione qualquer tecla para reiniciar o celular! echo ----------------------------------------------------------------------------------------------- pause fastboot reboot exit
#Property to enable display default color mode vendor.display.enable_default_color_mode=1
# Display Properties as per treble compliance vendor.gralloc.enable_fb_ubwc=1 vendor.display.disable_skip_validate=1
#ro.hdmi.enable=true # # system props for the cne module # persist.vendor.cne.feature=1
#system props for the MM modules media.stagefright.enable-player=true media.stagefright.enable-http=true media.stagefright.enable-aac=true media.stagefright.enable-qcp=true media.stagefright.enable-scan=true mmp.enable.3g2=true media.aac_51_output_enabled=true mm.enable.smoothstreaming=true media.settings.xml=/vendor/etc/media_profiles_vendor.xml #codecs:(PARSER_)AAC AC3 AMR_NB AMR_WB ASF AVI DTS FLV 3GP 3G2 MKV MP2PS MP2TS MP3 OGG QCP WAV FLAC AIFF APE DSD vendor.mm.enable.qcom_parser=13631487 persist.mm.enable.prefetch=true
#parser input buffer size(256kb) in byte stream mode audio.parser.ip.buffer.size=262144
#property to enable narrow search range for video encoding vidc.enc.target_support_bframe=1 vendor.vidc.enc.disable_bframes=1 vendor.vidc.dec.enable.downscalar=1
# enable PQ feature by default vendor.vidc.enc.disable.pq=false
# Additional buffers shared between Camera and Video vidc.enc.dcvs.extra-buff-count=2
# # system props for the data modules # ro.vendor.use_data_netmgrd=true persist.vendor.data.mode=concurrent #system props for time-services persist.timed.enable=true
# system property for maximum number of HFP client connections #bt.max.hfpclient.connections=1
# System property for cabl ro.qualcomm.cabl=0 ro.vendor.display.cabl=0
# # System props for telephony # System prop to turn on CdmaLTEPhone always telephony.lteOnCdmaDevice=1
#system prop for wipower support #ro.bluetooth.emb_wp_mode=true #ro.bluetooth.wipower=true
# #snapdragon value add features # ro.qc.sdk.audio.ssr=false ##fluencetype can be "fluence" or "fluencepro" or "none" ro.qc.sdk.audio.fluencetype=none persist.audio.fluence.voicecall=true persist.audio.fluence.voicerec=false persist.audio.fluence.speaker=true #Set for SDM660 tunnel.audio.encode = false #Buffer size in kbytes for compress offload playback audio.offload.buffer.size.kb=64 #Minimum duration for offload playback in secs audio.offload.min.duration.secs=30 #Enable offload audio video playback by default audio.offload.video=true
#Enable PCM offload by default audio.offload.pcm.16bit.enable=true audio.offload.pcm.24bit.enable=true
#Enable audio track offload by default audio.offload.track.enable=true
#Enable music through deep buffer audio.deep_buffer.media=true
#enable downsampling for multi-channel content > 48Khz audio.playback.mch.downsample=true
#disable voice path for PCM VoIP by default use.voice.path.for.pcm.voip=false ro.config.vc_call_vol_steps=8
#enable software decoders for ALAC and APE. use.qti.sw.alac.decoder=true use.qti.sw.ape.decoder=true
#System property for FM transmitter ro.fm.transmitter=false #enable dsp gapless mode by default audio.offload.gapless.enabled=true
#system prop for RmNet Data persist.data.df.dev_name=rmnet_usb0
#property to enable user to access Google WFD settings #persist.debug.wfd.enable=1 #Enable stm-events persist.debug.coresight.config=stm-events ##property to choose between virtual/external wfd display persist.sys.wfd.virtual=0
# system prop for NFC DT ro.nfc.port=I2C
#property for vendor specific library ro.vendor.at_library=libqti-at.so
#min/max cpu in core control ro.vendor.qti.core_ctl_min_cpu=2 ro.vendor.qti.core_ctl_max_cpu=4
#property to enable DS2 dap audio.dolby.ds2.enabled=false
#Settings to enable sensors #Device Orientation sensor ro.vendor.sensors.dev_ori=true #Persistent Motion Detector # PRODUCT_PROPERTY_OVERRIDES only append the same property again in the # resulting build.prop file, and the first line found for a particular propery # name still takes precidence at runtime. #ro.vendor.sensors.pmd=true #Stationary Detector ro.vendor.sensors.sta_detect=true #Motion Detector ro.vendor.sensors.mot_detect=true
# Motorola: This property no longer supported #config.disable_consumerir=true
#Expose aux camera for below packages vendor.camera.aux.packagelist=org.codeaurora.snapcam
persist.vendor.camera.validate.aux=1
#disable UBWC for camera persist.vendor.camera.preview.ubwc=0
#set maximum supported adapter voltage persist.chg.max_volt_mv=9000
#system prop for Bluetooth SOC type vendor.bluetooth.soc=cherokee ro.bluetooth.library_name=libbluetooth_qti.so persist.vendor.btstack.enable.splita2dp=false persist.vendor.btstack.a2dp_offload_cap=sbc-aptx-aptxhd-aac
# ro.location properties below are used in conjunction # with NLP_MODE setting in /vendor/etc/izat.conf # either as the main network provider or as a fallback # provider depending on NLP_MODE that is set # These properties are optional and will not cause # issues if not set to existing packages. # ro.location.osnlp.package sets the name of default # OS sepecific network location provider package to use # ro.location.osnlp.region.package is set to the name # of the alternative network location provider package # to be used for a particular region where the default # network location provider is not functional ro.location.osnlp.package=com.google.android.gms ro.location.osnlp.region.package=
VERSION INFO FOUND UNDER ABOUT PHONE SCREEN: System Version: 29.261.5.lake.retail.en.US Model Number: moto g(7) plus Android Version: 9 Baseband Version: M636_09.25.02.49R Build Id: PPWS29.98-111-5 SW Display Build ID: PPWS29.98-111-5 Build Date: Sun Sep 29 12:36:50 CDT 2019
OTHER MISC VERSION INFO: Subsidy Lock Config: slcf_rev_d_default_v1.0.nvm Regulatory Info (eLabel): regulatory_info_default.png Blur Version: Blur_Version.29.261.5.lake.retail.en.US Version when read from CPV: lake-user 9 PPWS29.98-111-5 5d0ef release-keys
AB Update Enabled: True Full Treble Enabled: True
Command:
fastboot getvar max-sparse-size fastboot oem fb_mode_set fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash modem NON-HLOS.bin fastboot flash fsg fsg.mbn fastbooterase modemst1 fastbooterase modemst2 fastboot flash bluetooth BTFM.bin fastboot flash dsp dspso.bin fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system_b system_b.img_sparsechunk.0 fastboot flash system_b system_b.img_sparsechunk.1 fastboot flash vendor vendor.img_sparsechunk.0 fastboot flash vendor vendor.img_sparsechunk.1 fastboot flash oem oem.img fastboot flash oem_b oem_other.img fastbooterase carrier fastbooterase userdata fastbooterase ddr fastboot oem fb_mode_clear echo ----------------------------------------------------------------------------------------------- echo English - Process concluded! echo Português - Processo concluído! echo English - Press any key to restart the phone! echo Português - Pressione qualquer tecla para reiniciar o celular! echo ----------------------------------------------------------------------------------------------- pause fastboot reboot exit
VERSION INFO FOUND UNDER ABOUT PHONE SCREEN: System Version: 29.31.71.lake.retail.en.US Model Number: moto g(7) plus Android Version: 9 Baseband Version: M636_03.08.02.35R Build Id: PPW29.98-66 SW Display Build ID: PPW29.98-66 Build Date: Fri Feb 1 06:37:51 CST 2019
OTHER MISC VERSION INFO: Subsidy Lock Config: slcf_rev_d_default_v1.0.nvm Regulatory Info (eLabel): regulatory_info_default.png Blur Version: Blur_Version.29.31.71.lake.retail.en.US Version when read from CPV: lake-user 9 PPW29.98-66 837b3 release-keys
AB Update Enabled: True Full Treble Enabled: True
Command:
fastboot getvar max-sparse-size fastboot oem fb_mode_set fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash modem NON-HLOS.bin fastboot flash fsg fsg.mbn fastbooterase modemst1 fastbooterase modemst2 fastboot flash bluetooth BTFM.bin fastboot flash dsp dspso.bin fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system_b system_b.img_sparsechunk.0 fastboot flash system_b system_b.img_sparsechunk.1 fastboot flash vendor vendor.img_sparsechunk.0 fastboot flash vendor vendor.img_sparsechunk.1 fastboot flash oem oem.img fastboot flash oem_b oem_other.img fastbooterase carrier fastbooterase userdata fastbooterase ddr fastboot oem fb_mode_clear echo ----------------------------------------------------------------------------------------------- echo English - Process concluded! echo Português - Processo concluído! echo English - Press any key to restart the phone! echo Português - Pressione qualquer tecla para reiniciar o celular! echo ----------------------------------------------------------------------------------------------- pause fastboot reboot exit
#Property to enable display default color mode vendor.display.enable_default_color_mode=1
# Display Properties as per treble compliance vendor.gralloc.enable_fb_ubwc=1 vendor.display.disable_skip_validate=1
#ro.hdmi.enable=true # # system props for the cne module # persist.vendor.cne.feature=1
#system props for the MM modules media.stagefright.enable-player=true media.stagefright.enable-http=true media.stagefright.enable-aac=true media.stagefright.enable-qcp=true media.stagefright.enable-scan=true mmp.enable.3g2=true media.aac_51_output_enabled=true mm.enable.smoothstreaming=true media.settings.xml=/vendor/etc/media_profiles_vendor.xml #codecs:(PARSER_)AAC AC3 AMR_NB AMR_WB ASF AVI DTS FLV 3GP 3G2 MKV MP2PS MP2TS MP3 OGG QCP WAV FLAC AIFF APE DSD vendor.mm.enable.qcom_parser=13631487 persist.mm.enable.prefetch=true
#parser input buffer size(256kb) in byte stream mode audio.parser.ip.buffer.size=262144
#property to enable narrow search range for video encoding vidc.enc.target_support_bframe=1 vendor.vidc.enc.disable_bframes=1 vendor.vidc.dec.enable.downscalar=1
# enable PQ feature by default vendor.vidc.enc.disable.pq=false
# Additional buffers shared between Camera and Video vidc.enc.dcvs.extra-buff-count=2
# # system props for the data modules # ro.vendor.use_data_netmgrd=true persist.vendor.data.mode=concurrent #system props for time-services persist.timed.enable=true
# system property for maximum number of HFP client connections #bt.max.hfpclient.connections=1
# System property for cabl ro.qualcomm.cabl=0 ro.vendor.display.cabl=0
# # System props for telephony # System prop to turn on CdmaLTEPhone always telephony.lteOnCdmaDevice=1
#system prop for wipower support #ro.bluetooth.emb_wp_mode=true #ro.bluetooth.wipower=true
# #snapdragon value add features # ro.qc.sdk.audio.ssr=false ##fluencetype can be "fluence" or "fluencepro" or "none" ro.qc.sdk.audio.fluencetype=none persist.audio.fluence.voicecall=true persist.audio.fluence.voicerec=false persist.audio.fluence.speaker=true #Set for SDM660 tunnel.audio.encode = false #Buffer size in kbytes for compress offload playback audio.offload.buffer.size.kb=64 #Minimum duration for offload playback in secs audio.offload.min.duration.secs=30 #Enable offload audio video playback by default audio.offload.video=true
#Enable PCM offload by default audio.offload.pcm.16bit.enable=true audio.offload.pcm.24bit.enable=true
#Enable audio track offload by default audio.offload.track.enable=true
#Enable music through deep buffer audio.deep_buffer.media=true
#enable downsampling for multi-channel content > 48Khz audio.playback.mch.downsample=true
#disable voice path for PCM VoIP by default use.voice.path.for.pcm.voip=false ro.config.vc_call_vol_steps=8
#enable software decoders for ALAC and APE. use.qti.sw.alac.decoder=true use.qti.sw.ape.decoder=true
#System property for FM transmitter ro.fm.transmitter=false #enable dsp gapless mode by default audio.offload.gapless.enabled=true
#system prop for RmNet Data persist.data.df.dev_name=rmnet_usb0
#property to enable user to access Google WFD settings #persist.debug.wfd.enable=1 #Enable stm-events persist.debug.coresight.config=stm-events ##property to choose between virtual/external wfd display persist.sys.wfd.virtual=0
# system prop for NFC DT ro.nfc.port=I2C
#property for vendor specific library ro.vendor.at_library=libqti-at.so
#min/max cpu in core control ro.vendor.qti.core_ctl_min_cpu=2 ro.vendor.qti.core_ctl_max_cpu=4
#property to enable DS2 dap audio.dolby.ds2.enabled=false
#Settings to enable sensors #Device Orientation sensor ro.vendor.sensors.dev_ori=true #Persistent Motion Detector # PRODUCT_PROPERTY_OVERRIDES only append the same property again in the # resulting build.prop file, and the first line found for a particular propery # name still takes precidence at runtime. #ro.vendor.sensors.pmd=true #Stationary Detector ro.vendor.sensors.sta_detect=true #Motion Detector ro.vendor.sensors.mot_detect=true
# Motorola: This property no longer supported #config.disable_consumerir=true
#Expose aux camera for below packages vendor.camera.aux.packagelist=org.codeaurora.snapcam
persist.vendor.camera.validate.aux=1
#disable UBWC for camera persist.vendor.camera.preview.ubwc=0
#set maximum supported adapter voltage persist.chg.max_volt_mv=9000
#system prop for Bluetooth SOC type vendor.bluetooth.soc=cherokee ro.bluetooth.library_name=libbluetooth_qti.so persist.vendor.btstack.enable.splita2dp=false persist.vendor.btstack.a2dp_offload_cap=sbc-aptx-aptxhd-aac
# ro.location properties below are used in conjunction # with NLP_MODE setting in /vendor/etc/izat.conf # either as the main network provider or as a fallback # provider depending on NLP_MODE that is set # These properties are optional and will not cause # issues if not set to existing packages. # ro.location.osnlp.package sets the name of default # OS sepecific network location provider package to use # ro.location.osnlp.region.package is set to the name # of the alternative network location provider package # to be used for a particular region where the default # network location provider is not functional ro.location.osnlp.package=com.google.android.gms ro.location.osnlp.region.package=
VERSION INFO FOUND UNDER ABOUT PHONE SCREEN: System Version: 29.31.31.lake.retail.en.US Model Number: moto g(7) plus Android Version: 9 Baseband Version: M636_23.790.02.24R Build Id: PPW29.98-28 SW Display Build ID: PPW29.98-28 Build Date: Tue Dec 11 09:40:29 CST 2018
OTHER MISC VERSION INFO: Subsidy Lock Config: slcf_rev_d_default_v1.0.nvm Regulatory Info (eLabel): regulatory_info_default.png Blur Version: Blur_Version.29.31.31.lake.retail.en.US Version when read from CPV: lake-user 9 PPW29.98-28 b7d2f release-keys
AB Update Enabled: True Full Treble Enabled: True
Command:
fastboot getvar max-sparse-size fastboot oem fb_mode_set fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash modem NON-HLOS.bin fastboot flash fsg fsg.mbn fastbooterase modemst1 fastbooterase modemst2 fastboot flash bluetooth BTFM.bin fastboot flash dsp dspso.bin fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system_b system_b.img_sparsechunk.0 fastboot flash system_b system_b.img_sparsechunk.1 fastboot flash vendor vendor.img_sparsechunk.0 fastboot flash vendor vendor.img_sparsechunk.1 fastboot flash oem oem.img fastboot flash oem_b oem_other.img fastbooterase carrier fastbooterase userdata fastbooterase ddr fastboot oem fb_mode_clear echo ----------------------------------------------------------------------------------------------- echo English - Process concluded! echo Português - Processo concluído! echo English - Press any key to restart the phone! echo Português - Pressione qualquer tecla para reiniciar o celular! echo ----------------------------------------------------------------------------------------------- pause fastboot reboot exit
#Property to enable display default color mode vendor.display.enable_default_color_mode=1
# Display Properties as per treble compliance vendor.gralloc.enable_fb_ubwc=1 vendor.display.disable_skip_validate=1
#ro.hdmi.enable=true # # system props for the cne module # persist.vendor.cne.feature=1
#system props for the MM modules media.stagefright.enable-player=true media.stagefright.enable-http=true media.stagefright.enable-aac=true media.stagefright.enable-qcp=true media.stagefright.enable-scan=true mmp.enable.3g2=true media.aac_51_output_enabled=true mm.enable.smoothstreaming=true media.settings.xml=/vendor/etc/media_profiles_vendor.xml #codecs:(PARSER_)AAC AC3 AMR_NB AMR_WB ASF AVI DTS FLV 3GP 3G2 MKV MP2PS MP2TS MP3 OGG QCP WAV FLAC AIFF APE DSD vendor.mm.enable.qcom_parser=13631487 persist.mm.enable.prefetch=true
#parser input buffer size(256kb) in byte stream mode audio.parser.ip.buffer.size=262144
#property to enable narrow search range for video encoding vidc.enc.target_support_bframe=1 vendor.vidc.enc.disable_bframes=1 vendor.vidc.dec.enable.downscalar=1
# enable PQ feature by default vendor.vidc.enc.disable.pq=false
# Additional buffers shared between Camera and Video vidc.enc.dcvs.extra-buff-count=2
# # system props for the data modules # ro.vendor.use_data_netmgrd=true persist.vendor.data.mode=concurrent #system props for time-services persist.timed.enable=true
# system property for maximum number of HFP client connections #bt.max.hfpclient.connections=1
# System property for cabl ro.qualcomm.cabl=0 ro.vendor.display.cabl=0
# # System props for telephony # System prop to turn on CdmaLTEPhone always telephony.lteOnCdmaDevice=1
#system prop for wipower support #ro.bluetooth.emb_wp_mode=true #ro.bluetooth.wipower=true
# #snapdragon value add features # ro.qc.sdk.audio.ssr=false ##fluencetype can be "fluence" or "fluencepro" or "none" ro.qc.sdk.audio.fluencetype=none persist.audio.fluence.voicecall=true persist.audio.fluence.voicerec=false persist.audio.fluence.speaker=true #Set for SDM660 tunnel.audio.encode = false #Buffer size in kbytes for compress offload playback audio.offload.buffer.size.kb=64 #Minimum duration for offload playback in secs audio.offload.min.duration.secs=30 #Enable offload audio video playback by default audio.offload.video=true
#Enable PCM offload by default audio.offload.pcm.16bit.enable=true audio.offload.pcm.24bit.enable=true
#Enable audio track offload by default audio.offload.track.enable=true
#Enable music through deep buffer audio.deep_buffer.media=true
#enable downsampling for multi-channel content > 48Khz audio.playback.mch.downsample=true
#disable voice path for PCM VoIP by default use.voice.path.for.pcm.voip=false ro.config.vc_call_vol_steps=8
#enable software decoders for ALAC and APE. use.qti.sw.alac.decoder=true use.qti.sw.ape.decoder=true
#System property for FM transmitter ro.fm.transmitter=false #enable dsp gapless mode by default audio.offload.gapless.enabled=true
#system prop for RmNet Data persist.data.df.dev_name=rmnet_usb0
#property to enable user to access Google WFD settings #persist.debug.wfd.enable=1 #Enable stm-events persist.debug.coresight.config=stm-events ##property to choose between virtual/external wfd display persist.sys.wfd.virtual=0
# system prop for NFC DT ro.nfc.port=I2C
#property for vendor specific library ro.vendor.at_library=libqti-at.so
#min/max cpu in core control ro.vendor.qti.core_ctl_min_cpu=2 ro.vendor.qti.core_ctl_max_cpu=4
#property to enable DS2 dap audio.dolby.ds2.enabled=false
#Settings to enable sensors #Device Orientation sensor ro.vendor.sensors.dev_ori=true #Persistent Motion Detector # PRODUCT_PROPERTY_OVERRIDES only append the same property again in the # resulting build.prop file, and the first line found for a particular propery # name still takes precidence at runtime. #ro.vendor.sensors.pmd=true #Stationary Detector ro.vendor.sensors.sta_detect=true #Motion Detector ro.vendor.sensors.mot_detect=true
# Motorola: This property no longer supported #config.disable_consumerir=true
#Expose aux camera for below packages vendor.camera.aux.packagelist=org.codeaurora.snapcam
persist.vendor.camera.validate.aux=1
#disable UBWC for camera persist.vendor.camera.preview.ubwc=0
#set maximum supported adapter voltage persist.chg.max_volt_mv=9000
#system prop for Bluetooth SOC type vendor.bluetooth.soc=cherokee ro.bluetooth.library_name=libbluetooth_qti.so persist.vendor.btstack.enable.splita2dp=false persist.vendor.btstack.a2dp_offload_cap=sbc-aptx-aptxhd-aac
# ro.location properties below are used in conjunction # with NLP_MODE setting in /vendor/etc/izat.conf # either as the main network provider or as a fallback # provider depending on NLP_MODE that is set # These properties are optional and will not cause # issues if not set to existing packages. # ro.location.osnlp.package sets the name of default # OS sepecific network location provider package to use # ro.location.osnlp.region.package is set to the name # of the alternative network location provider package # to be used for a particular region where the default # network location provider is not functional ro.location.osnlp.package=com.google.android.gms ro.location.osnlp.region.package=
VERSION INFO FOUND UNDER ABOUT PHONE SCREEN: System Version: 29.241.123.lake.retail.en.US Model Number: moto g(7) plus Android Version: 9 Baseband Version: M636_09.25.02.49R Build Id: PPW29.98-111 SW Display Build ID: PPW29.98-111 Build Date: Thu Jul 4 02:00:50 CDT 2019
OTHER MISC VERSION INFO: Subsidy Lock Config: slcf_rev_d_default_v1.0.nvm Regulatory Info (eLabel): regulatory_info_default.png Blur Version: Blur_Version.29.241.123.lake.retail.en.US Version when read from CPV: lake-user 9 PPW29.98-111 bc251 release-keys
AB Update Enabled: True Full Treble Enabled: True
Command:
fastboot getvar max-sparse-size fastboot oem fb_mode_set fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash modem NON-HLOS.bin fastboot flash fsg fsg.mbn fastbooterase modemst1 fastbooterase modemst2 fastboot flash bluetooth BTFM.bin fastboot flash dsp dspso.bin fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system_b system_b.img_sparsechunk.0 fastboot flash system_b system_b.img_sparsechunk.1 fastboot flash vendor vendor.img_sparsechunk.0 fastboot flash vendor vendor.img_sparsechunk.1 fastboot flash oem oem.img fastboot flash oem_b oem_other.img fastbooterase carrier fastbooterase userdata fastbooterase ddr fastboot oem fb_mode_clear echo ----------------------------------------------------------------------------------------------- echo English - Process concluded! echo Português - Processo concluído! echo English - Press any key to restart the phone! echo Português - Pressione qualquer tecla para reiniciar o celular! echo ----------------------------------------------------------------------------------------------- pause fastboot reboot exit
#Property to enable display default color mode vendor.display.enable_default_color_mode=1
# Display Properties as per treble compliance vendor.gralloc.enable_fb_ubwc=1 vendor.display.disable_skip_validate=1
#ro.hdmi.enable=true # # system props for the cne module # persist.vendor.cne.feature=1
#system props for the MM modules media.stagefright.enable-player=true media.stagefright.enable-http=true media.stagefright.enable-aac=true media.stagefright.enable-qcp=true media.stagefright.enable-scan=true mmp.enable.3g2=true media.aac_51_output_enabled=true mm.enable.smoothstreaming=true media.settings.xml=/vendor/etc/media_profiles_vendor.xml #codecs:(PARSER_)AAC AC3 AMR_NB AMR_WB ASF AVI DTS FLV 3GP 3G2 MKV MP2PS MP2TS MP3 OGG QCP WAV FLAC AIFF APE DSD vendor.mm.enable.qcom_parser=13631487 persist.mm.enable.prefetch=true
#parser input buffer size(256kb) in byte stream mode audio.parser.ip.buffer.size=262144
#property to enable narrow search range for video encoding vidc.enc.target_support_bframe=1 vendor.vidc.enc.disable_bframes=1 vendor.vidc.dec.enable.downscalar=1
# enable PQ feature by default vendor.vidc.enc.disable.pq=false
# Additional buffers shared between Camera and Video vidc.enc.dcvs.extra-buff-count=2
# # system props for the data modules # ro.vendor.use_data_netmgrd=true persist.vendor.data.mode=concurrent #system props for time-services persist.timed.enable=true
# system property for maximum number of HFP client connections #bt.max.hfpclient.connections=1
# System property for cabl ro.qualcomm.cabl=0 ro.vendor.display.cabl=0
# # System props for telephony # System prop to turn on CdmaLTEPhone always telephony.lteOnCdmaDevice=1
#system prop for wipower support #ro.bluetooth.emb_wp_mode=true #ro.bluetooth.wipower=true
# #snapdragon value add features # ro.qc.sdk.audio.ssr=false ##fluencetype can be "fluence" or "fluencepro" or "none" ro.qc.sdk.audio.fluencetype=none persist.audio.fluence.voicecall=true persist.audio.fluence.voicerec=false persist.audio.fluence.speaker=true #Set for SDM660 tunnel.audio.encode = false #Buffer size in kbytes for compress offload playback audio.offload.buffer.size.kb=64 #Minimum duration for offload playback in secs audio.offload.min.duration.secs=30 #Enable offload audio video playback by default audio.offload.video=true
#Enable PCM offload by default audio.offload.pcm.16bit.enable=true audio.offload.pcm.24bit.enable=true
#Enable audio track offload by default audio.offload.track.enable=true
#Enable music through deep buffer audio.deep_buffer.media=true
#enable downsampling for multi-channel content > 48Khz audio.playback.mch.downsample=true
#disable voice path for PCM VoIP by default use.voice.path.for.pcm.voip=false ro.config.vc_call_vol_steps=8
#enable software decoders for ALAC and APE. use.qti.sw.alac.decoder=true use.qti.sw.ape.decoder=true
#System property for FM transmitter ro.fm.transmitter=false #enable dsp gapless mode by default audio.offload.gapless.enabled=true
#system prop for RmNet Data persist.data.df.dev_name=rmnet_usb0
#property to enable user to access Google WFD settings #persist.debug.wfd.enable=1 #Enable stm-events persist.debug.coresight.config=stm-events ##property to choose between virtual/external wfd display persist.sys.wfd.virtual=0
# system prop for NFC DT ro.nfc.port=I2C
#property for vendor specific library ro.vendor.at_library=libqti-at.so
#min/max cpu in core control ro.vendor.qti.core_ctl_min_cpu=2 ro.vendor.qti.core_ctl_max_cpu=4
#property to enable DS2 dap audio.dolby.ds2.enabled=false
#Settings to enable sensors #Device Orientation sensor ro.vendor.sensors.dev_ori=true #Persistent Motion Detector # PRODUCT_PROPERTY_OVERRIDES only append the same property again in the # resulting build.prop file, and the first line found for a particular propery # name still takes precidence at runtime. #ro.vendor.sensors.pmd=true #Stationary Detector ro.vendor.sensors.sta_detect=true #Motion Detector ro.vendor.sensors.mot_detect=true
# Motorola: This property no longer supported #config.disable_consumerir=true
#Expose aux camera for below packages vendor.camera.aux.packagelist=org.codeaurora.snapcam
persist.vendor.camera.validate.aux=1
#disable UBWC for camera persist.vendor.camera.preview.ubwc=0
#set maximum supported adapter voltage persist.chg.max_volt_mv=9000
#system prop for Bluetooth SOC type vendor.bluetooth.soc=cherokee ro.bluetooth.library_name=libbluetooth_qti.so persist.vendor.btstack.enable.splita2dp=false persist.vendor.btstack.a2dp_offload_cap=sbc-aptx-aptxhd-aac
# ro.location properties below are used in conjunction # with NLP_MODE setting in /vendor/etc/izat.conf # either as the main network provider or as a fallback # provider depending on NLP_MODE that is set # These properties are optional and will not cause # issues if not set to existing packages. # ro.location.osnlp.package sets the name of default # OS sepecific network location provider package to use # ro.location.osnlp.region.package is set to the name # of the alternative network location provider package # to be used for a particular region where the default # network location provider is not functional ro.location.osnlp.package=com.google.android.gms ro.location.osnlp.region.package=
VERSION INFO FOUND UNDER ABOUT PHONE SCREEN: System Version: 29.241.116.lake.retail.en.US Model Number: moto g(7) plus Android Version: 9 Baseband Version: M636_08.23.02.46R Build Id: PPW29.98-107 SW Display Build ID: PPW29.98-107 Build Date: Fri May 24 10:35:28 CDT 2019
OTHER MISC VERSION INFO: Subsidy Lock Config: slcf_rev_d_default_v1.0.nvm Regulatory Info (eLabel): regulatory_info_default.png Blur Version: Blur_Version.29.241.116.lake.retail.en.US Version when read from CPV: lake-user 9 PPW29.98-107 34744 release-keys
AB Update Enabled: True Full Treble Enabled: True
Command:
fastboot getvar max-sparse-size fastboot oem fb_mode_set fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash modem NON-HLOS.bin fastboot flash fsg fsg.mbn fastbooterase modemst1 fastbooterase modemst2 fastboot flash bluetooth BTFM.bin fastboot flash dsp dspso.bin fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system_b system_b.img_sparsechunk.0 fastboot flash system_b system_b.img_sparsechunk.1 fastboot flash vendor vendor.img_sparsechunk.0 fastboot flash vendor vendor.img_sparsechunk.1 fastboot flash oem oem.img fastboot flash oem_b oem_other.img fastbooterase carrier fastbooterase userdata fastbooterase ddr fastboot oem fb_mode_clear echo ----------------------------------------------------------------------------------------------- echo English - Process concluded! echo Português - Processo concluído! echo English - Press any key to restart the phone! echo Português - Pressione qualquer tecla para reiniciar o celular! echo ----------------------------------------------------------------------------------------------- pause fastboot reboot exit
Comentário
Aguarde, carregando...